Sherwin Williams Firetex FX1002 Solvent Based Intumescent is a single pack, solvent based, thin film 120 minute intumescent coating for on site application onto structural steel.
FIRETEX FX1002 is designed for site application by airless spray, to provide fire resistance for up to 120 minutes on structural steel. After appropriate drying, FIRETEX FX1002 specifications can be exposed to the weather for up to 6 months provided that the specific use does not lead to ponding water due to rainfall, condensation or other site circumstances.
Recommended application via airless spray or brush. Recommended cleanser no2. FIRETEX FX1002 can resist normal weather conditions for up to 6 months without topcoat provided it has had appropriate drying prior to exposure. Once an approved topcoat has been applied as appropriate to the prevailing conditions, then durability will be substantially enhanced. Several primers have been approved for use under FIRETEX FX1002, contact our technical team for further info.
For certain dry, internal situations where the final colour/ appearance is not critical, then FIRETEX FX1002 may remain un-topcoated. For externally exposed steelwork and severe internal environments Acrolon C137V2 or Acrolon C237 must be used as a topcoat. For other internal environments where a topcoat is required then FIRETEX M71V2 should be used. In all instances for subsequent re-decoration, use FIRETEX M71V2, Acrolon C137V2 or Acrolon C237 as appropriate.
IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.
- Certifire Approved – Certificate CF708
- This product has been assessed in accordance with the Criteria of Acceptability given in the ASFP/BCF Industry Guidance Document
- This product has been tested and assessed in accordance with the ASFP firetesting protocol for cellular beam protection. See Section 6.3 from ASFP Yellow Book 4th Edition
- Tested and assessed to EN13381-8 European Technical Approval ETA-12/0049 CE Marking Number 1121-CPD-GA5005
- Drying Time: 1 hour at 15°C to touch, 4 hours at 15°C to recoat
- Colour: White
- Available in 20 Litres
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.