Sherwin Williams Firetex FX1005

SKU id22065 UN1263 (Class: 3, Pk Grp: III)
A single pack thin film intumescent coating for application via airless spray. Provides fire resistance for up to 120 minutes on structural steel.
Available in 20 Litres in White
£308.00 (£369.60 Inc VAT)

Product Description

Sherwin Williams Firetex FX1005 is a single pack thin film intumescent coating for application via airless spray. Provides fire resistance for up to 120 minutes on structural steel.

Best Uses

Sherwin Williams Firetex FX1005 is designed for site application by airless spray, to provide fire resistance for up to 120 minutes on structural steel. After appropriate drying, Sherwin Williams Firetex FX1005 specifications can be exposed to the weather for up to 6 months provided that the specific use does not lead to ponding water due to rainfall, condensation or other site circumstances.

Application

Several primers have been approved for use under Sherwin Williams Firetex FX1005. Please consult our technical team for a suitable system.

Sherwin Williams Firetex FX1005 is designed for use over a suitably prepared and primed substrate. Ensure surfaces to be coated are clean, dry and free from all
surface contamination. Under certain circumstances it may be possible to apply Sherwin Williams Firetex FX1005 directly to steel blast cleaned to a minimum standard of Sa2½ BS EN ISO 8501-1:2001, surface profile in the range 50-100 microns.

Apply using airless spray or brush for awkward surfaces, See datasheet for airless spray set up and specifications.

Recommended Topcoats

For certain dry, internal situations where the final colour / appearance is not critical, then Sherwin Williams Firetex FX1005 may remain un-topcoated. For externally exposed steelwork and severe internal environments Sherwin Williams Acrolon C137V2 or Sherwin Williams Acrolon C237 must be used as a topcoat. For other internal environments where a topcoat is required then Sherwin Williams Firetex M71V2 should be used. In all instances for subsequent re-decoration, use Sherwin Willaims Acrolon M71V2, Acrolon C137V2 or Acrolon C237 as appropriate.

IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.

Recommended Products To Use


Sherwin Williams Acrolon C137V2 - Formerly Resistex & Transgard TG168

Sherwin Williams Acrolon C137V2 - Formerly Resistex & Transgard TG168

A high performance, fast drying, acrylic urethane gloss finish for use where long term exterior gloss and colour retention...

£88.47 (£106.16 Inc VAT)
Sherwin Williams Acrolon C237 - Formerly Leighs Resistex

Sherwin Williams Acrolon C237 - Formerly Leighs Resistex

A high performance fast drying acrylic urethane sheen finish for use where long term exterior colour retention characteris...

£88.47 (£106.16 Inc VAT)
Sherwin Williams Firetex M71V2 - Formerly Leighs

Sherwin Williams Firetex M71V2 - Formerly Leighs

A decorative sheen top coat designed for internal environments over Sherwin Williams intumescent primers.

£58.47 (£70.16 Inc VAT)