Sherwin Williams Firetex FX5060 is a water based TCEP free, thin film intumescent coating for protection up to 60 minutes on structural steel.
Sherwin Williams Firetex FX5060 is designed for application by airless spray to provide fire resistance for periods of up to 60 minutes on structural steel.
For use in internal dry controlled environments without topcoat (C1 according to ISO12944-2:1998) and external urban or uncontrolled internal environments (C3 according to ISO12944-2:1998) with topcoat.
Recommended application via airless spray or brush. Must not be applied directly to galvanized steel and zinc rich primers. If it can be guaranteed that application and subsequent in-service conditions will be in a C1 environment as defined in ISO 12944-2:1998, then no topcoat is required.
IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.
- Certifire Approved – Certificate CF842
- This product has been assessed in accordance with the Criteria of Acceptability given in the ASFP/BCF Industry Guidance document
- This product has been tested and assessed in accordance with the ASFP fire testing protocol for cellular beam protection. See Section 6.3 from ASFP Yellow Book 4th Edition
- LuL APR No. 1999 - Intumescent paint system for the fire protection of steelwork
- Drying Times: 3 hours to touch at 15°C, 6 hours to recoat at 15°C
- Available in White
- Available in 20 Litres
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.