Sherwin Williams Firetex J220 is a high temperature jet fire resistant fabric scrim cloth for use with Firetex M90/02.
As a high temperature jet fire resistant fabric scrim cloth designed to reinforce the insulation ‘char’ developed when FIRETEX M90/02 reacts in a fire. Suitable for use in hydrocarbon jet fires for the protection of structural steelwork, process vessel and support structures, and on deck and bulkhead panels. Installation to be in accordance with the FIRETEX M90/02 application manual and per certification requirements.
Installed by hand layup in accordance with the FIRETEX M90/02 Application Manual. Required quantity of cloth will depend on the size and shape of the structure to be fire protected. FIRETEX J220 cloth is supplied in rolls nominally 50m long and 1.27m wide. Cut cloth to size and install in accordance with the FIRETEX M90/02 Application Manual. FIRETEX J220 is intended to be encapsulated within wet applied FIRETEX M90/02.
IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.
- Approved by Lloyds Register of Shipping
- Approved by Det Norske Veritas
- Approved by American Bureau of Shipping
- Available in Black
- Available in 1.27m wide rolls that are 50m long
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.