Sherwin Williams Kem-Kromik 165 is a highly durable, silicone alkyd high gloss finish designed for external marine superstructures and MoD use.
Sherwin Williams Kem-Kromik 165 is a highly durable, silicone alkyd high gloss finish designed for external marine superstructures on aircraft carriers, military ship super structures, cruise ships and modern sea carriers. Suitable for Ministry of Defence use.
Ensure surfaces to be coated are clean, dry and free from all surface contamination. Use Sherwin M671 as a suitable undercoat. Recommended application method via airless spray, conventional spray or brush. Recommended thinner no1. Keep containers covered when not in use to avoid skinning. Any skin that may form on the surface of the paint in the container should be removed carefully to avoid the necessity of sieving the paint. Stir thoroughly before use to ensure complete mix. Avoid over stirring or continuous agitation. Clean equipment as soon as possible as material is fairly quick drying.
- NATO Approval No. 8010-99-982-2604 (Grey BS381C 676 5 Litres)
- Dry Film Thickness: 35 microns
- Theoretical coverage: 14.6m2 per litre
- Drying Times: 3 hours at 15°C to touch, 24 hours at 15°C to recoat
- Available in a limited range of colours
- Available in 20 Litres
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.