Sherwin Williams Macropoxy L574 - Formerly Leighs Metagard

SKU
ID9214
Part A: UN1263 (Class: 3, Pk Grp: II), Part B: UN3469 (Class: 3.8, Pk Grp: II)
Used as a temporary protective coating for steel surfaces prepared by abrasive blast cleaning.
Available in 5 and 20 Litres
From £110.02 £91.68
In stock
Only %1 left
Product Description

Sherwin Williams Macropoxy L574 - Formerly Leighs Metagard L524 is a 2 pack epoxy temporary protective primer for steel surfaces prepared by abrasive blast cleaning.

Best Uses

Sherwin Williams Macropoxy L574 is best suited as a temporary protective coating for steel surfaces prepared by abrasive blast cleaning. Suitable for use in conjunction with cathodically protected steel. Suitable for welding and fabrication and for overcoating with most paints in common use except high content metallic zinc products as per data sheets. Also suitable as a sealer for aluminium and zinc metal spray, or as a primer for use over stainless steel and non-ferrous metallic substrates.

Application

Recommended application via airless spray, conventional spray, roller or brush for small areas and touch up only. Recommended cleanser / thinner no5. FERROUS SURFACES: For optimum performance use round steel shot and blast clean to Sa2½ BS EN ISO 8501-1 (2007). Average surface profi le in the range 30-50 microns. NON FERROUS SURFACES: For optimum adhesion all surfaces should be flash blasted using non-metallic abrasive and coated with L574 within 4 hours of blasting. Under conditions of high humidity a shorter period will be necessary.

ALL SURFACES: Ensure surfaces to be coated are clean, dry and free from all surface contamination.Indefinitely overcoatable with epoxy systems provided the surfaces to be coated have been suitably cleaned. Where a high degree of gloss and colour retention is required, overcoat with Acrolon C137V2, Acrolon C237, Acrolon 1850 and Acrolon 7300 within 7 days at a minimum dft of 50 microns or in the case of Acrolon C750V2 overcoat within 4 days. These overcoating times refer to achievement of optimum adhesion at 23ºC and will vary with temperature. For overcoating with alkyd systems, consult Sherwin-Williams for advice.

Technical Details

Approvals

  • Network Rail item No. 7.1.2
  • LuL APR No. 285 - XN90 Paint System for New Steel for application to new construction work within LU infrastructure to provide corrosion protection for a 25 Year service life.
  • LuL APR No. 283 - N2/M21 Paint System for New and Maintenance Steel for application to bridges and structures to provide corrosion protection for a 25 Year service life.. Epigrip C123 can be substituted for Epigrip M922 as a potentially more cost effective product.
  • NATO Approval No. 8010-99-895-9894 (20 Litres)
  • Norsok M-501 System 2A
  • Norsok M-501 System 5A (Pre Qualified)
  • Norsok M-501 System 8B

Technical Info

Components: Two Pack
Type: Epoxy temporary protective primer
Finish: -
Stock Colours: Light Grey, Red Oxide
Tintable: No
VOC Content: 594gms/litre
Volume Solids: 29 ± 1%
Suitable Substrates: Stainless Steel
Application Method: Brush, Roller, Airless Spray or Conventional Spray
Theoretical Coverage: 11.6 m2/ltr
Wet Film Thickness (WFT): 86 microns
Dry Film Thickness (DFT): 25 microns
Induction Time: -
Pot Life: 8 hours @ 23°C
Touch Dry: 5 minutes at 23°C
Overcoatable: 3 hours at 23°C
To Handle: 20 minutes at 23°C
Cleaner / Thinner: Thinner No.5
Shelf Life: 12 months from date of production unopened or 'use by' date where specified
Packaging: Available in 5 Litres and 20 Litres

Related Products