Sherwin Williams Acrolon 1850 is a two pack isocyanate free finish based on an acrylic epoxy binder system that has good gloss retention, good resistance to UV rays, water spotting and weathering.
Sherwin Williams Acrolon 1850 is best used as a finish coat for exterior exposed surfaces where retention of gloss is required, and the use of isocyanate products is precluded or undesirable. Normally used in conjunction with epoxy primers and undercoats.
Sherwin Williams Acrolon 1850 has been principally designed for the offshire and fabric maintenance markings where the use of isocyanates is restricted but good coverage is desired with little downtime.
Compatible with a wide range of Macropoxy, Dura-plate, Zinc Clad Epoxy Primers and Buildcoats. Acrolon 1850 must be applied over epoxy materials within 4 days at 23°C to ensure satisfactory intercoat adhesion. Indefinately self-overcoatable.
Apply using airless spray, conventional spray, brush. Thiining of up to 5% vol may be required for spray application using cleanser / thinner no5. Ensure surfaces to be coated are clean, dry and free from all surface contamination. Steelwork coated with Sherwin Williams Acrolon 1850 Special Finish should be protected from weather for 6 hours after application.
- Complies with Norsok M501 Rev 6 System 1 as part of a three coat system
- Certified for decontamination in accordance with EX07190/06/33/03
- Finish: High Gloss
- Drying Times: 1 hou at 23°C to touch, 3 hours at 23°C to recoat
- Dry Film Thickness: 200 microns
- Theoretical Coverage: 2.94m2 per litre
- Pot Life: 3 hours at 23°C
- Available in White and Full Shade Range
- Available in 5 Litres
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.