Sika Sikadur 33 is a thixotropic two part structural adhesive based on epoxy resin in a cartridge, suitable for a huge range of substrates.
Sika Sikadur 33 is a suitable structural adhesive for concrete elements, hard natural stone, ceramics, fibre cement, mortar, bricks, blocks, masonry, render, steel, iron, aluminium, wood, polyester, and epoxy. Sika Sikadur 33 is also suitable for interior, vertical and overhead concrete repairs of corners and edges, hole and void filling, joint arises, joint filling and crack sealing, crack filling and sealing (non-moving).
Also ideal for metalwork, and carpentry such as fixing and fastening of handrails, railings, balustrades and supports, fixing of window and door frames. Sikadur 33 can be used on the following: Concrete, Hard natural stone, Solid rock, Hollow and solid masonry, Steel and Wood.
- Can be used on damp concrete
- Excellent adhesion to the substrate
- Non-sag, also overhead
- High load capacity
- Shrinkage-free hardening
Mortar and concrete must be older than 28 days. Adequate substrate strength (concrete, masonry, natural stone) must always be confirmed.
- Tested according to EN 1504-4
- Layer Thickness: 0.5 mm min. / 10 mm max
- Shrinkage: Hardens without shrinkage
- Compressive Strength: ~50 N/mm2 (14 days, +23°C)
|Type:||Thixotropic two part structural adhesive based on epoxy resin in a cartridge|
|Suitable Substrates:||For concrete, hard natural stone, solid rock, hollow and solid masonry, steel and wood|
|Application Method:||Pump Gun|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Pot Life:||60 minutes at 23°C|
|Fully Cured:||2 days at 20°C|
|Cleaner / Thinner:||-|
|Shelf Life:||12 months from date of production if stored properly in undamaged and unopened. On each Sikadur 33 cartridge the best before date is printed.|
|Packaging:||Available in 250 ml cartridge, 12 per box
Pallet: 60 boxes with 12 cartridges per box
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.