Sika Sikafloor 262 AS N

SKU
ID15543
Part A: UN3082 (Class: 9, Pk Grp: III), Part B: UN1760 (Class: 8, Pk Grp: III)
A two part, self-smoothing, coloured epoxy resin coating. It should be combined with Sikafloor Filler 1 or Sika Quartz Sand.
Available in 25 Kg. Tintable to almost an unlimited palette.
From £770.33 £641.94
In stock
Only %1 left
Product Description

Sika Sikafloor®-262 AS N is a two part, self-smoothing, coloured epoxy resin coating. Sikafloor®-262 AS N is the main wearing course of the Sikafloor® Multidur ES-24 ECF System. It should be combined with Sikafloor Filler 1 or Sika Quartz Sand.

Best Uses

Sika Sikafloor® 262 AS N may only be used by experienced professionals. Sika Sikafloor® 262 AS N is used as: Decorative and protective electrostatic conductive self-smoothing system for concrete or cement screeds with normal up to medium heavy wear.

Suitable as a wearing course in industries, such as automotive, electronics and pharmaceutical manufacturing, storage facilities and warehouses. Particularly suitable for areas with sensitive electronic equipment e.g. CNC machinery, computer rooms, aircraft maintenance sheds, battery-charging rooms and areas subjected to high explosion risk.

  • Electrostatic conductive
  • Good chemical and mechanical resistance
  • Easy to clean
  • Economical
  • Liquid proof
  • Semi-gloss finish
  • Slip resistant surface possible

Application

The concrete substrate must be sound and of sufficient compressive strength (minimum 25 N/mm2) with a minimum pull off strength of 1.5 N/mm2. The substrate must be clean, dry and free of all contaminants such as dirt, oil, grease, coatings and surface treatments, etc. If in doubt apply a test area first. Concrete substrates must be prepared mechanically using abrasive blast cleaning or scarifying equipment to remove cement laitance and achieve an open textured surface.
Weak concrete must be removed and surface defects such as blowholes and voids must be fully exposed. Repairs to the substrate, filling of blow holes/voids and surface levelling can be carried out using appropriate products from the Sika Sikafloor®, Sikadur® and Sikagard® range of materials.

The concrete or screed substrate has to be primed or levelled in order to achieve an even surface. Unevenness influences the film thickness and thus the conductivity. High spots must be removed by e.g. grinding. All dust, loose and friable material must be completely removed from all surfaces before application of the product, preferably by brush and/or vacuum.

Prior to mixing, stir part A mechanically. When all of part B has been added to part A, mix continuously for 2 minutes until a uniform mix has been achieved. When parts A and B have been mixed, add Sikafloor®- Filler 1 or the quartz sand 0.1 - 0.3 mm and mix for a further 2 minutes until a uniform mix has been achieved. To ensure thorough mixing pour materials into another container and mix again to achieve a consistent mix. Over mixing must be avoided to minimize air entrainment. Sikafloor®-262 AS N must be thoroughly mixed using a low speed electric stirrer (300 - 400 rpm) or other suitable equipment.

Sikafloor®-262 AS N is poured, spread evenly by means of a serrated trowel e.g. Large-Surface Scraper No. 656, Toothed blades No. 25 (www.polyplan.com). After spreading the material evenly, turn the serrated trowel and smooth the surface in order to achieve an aesthetically higher grade of finish. Roll immediately (within max. 10 minutes of application) in two directions with a steel spiked roller to ensure even thickness and to remove entrapped air. To obtain the highest level of aesthetic finish, spike roll in two directions at a 90 degree angle, passing only once in each direction.

Technical Details

Approvals

  • Sikafloor®-262 AS N conforms to the requirements of LEED EQ Credit 4.2: Low-Emitting Materials: Paints & Coatings SCAQMD Method 304-91 VOC Content < 100 g/l.
  • Self-smoothing, coloured epoxy resin coating according to EN 1504-2: 2004 and EN 13813, DoP 02 08 01 02 014 0 000007 2017, certified by Factory Production Control Body No. 0921, certificate 2017, and provided with the CE-mark
  • Fire classification in accordance with EN 13501-1, Report-No. 2007-B-0181/17, MPA Dresden, Germany, May 2007
  • Testing of electrostatic properties in accordance to IEC 61340, SP Institute, Test Report F900355:A, February 2009
  • Testing of Paint Compatibility in acc. to BMW-Standard 09-09-132-5, Polymer Institute, Test Report P 5541, August 2008
  • Varnishability test according to VW-standard PV 3.10.7 (paint wetting impairment substances (PWIS)) like silicones, HQM GmbH, Test Report 09-09-132-4,
    09.2009
  • Particle emission certificate Sikafloor®-262 AS N CSM Statement of Qualification - ISO 14644-1, class 4 - Report No. SI 1412-740, March 2015
  • Outgassing emission certificate Sikafloor®-262 AS NFCR: CSM Statement of Qualification - ISO 14644-8, class -8.0 - Report No. SI 1412-740, March 2015
  • Spark resistance in accordance with UFGS-09 97 23 of coating systems, Test report P 8625-E, Kiwa Polymer Institut

Systems

Sika Sikafloor 262 AS N is used within the following Sika systems:

  • Sikafloor MultiDur ES 24 ECF
  • Sikafloor MultiDur ES 43 ESD
  • Sikafloor MultiDur ET 14 ECF

See Data Sheets tab for System sheet downloadable PDF.

Technical Info

  • Electrostatic Behaviour: Resistance to ground1) Rg < 109 Ω, Typical average resistance to ground2) Rg ≤ 106 Ω
Components: Two Pack
Type: Epoxy
Finish: Semi Gloss
Stock Colours: Various stock colours
Tintable: Yes, to most RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable
VOC Content: < 100 g/L
Volume Solids: 97%
Suitable Substrates: Concrete
Application Method: Serrated trowel, spiked roller
Theoretical Coverage: Dependant on system. See data sheet
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: Roughly 25 minutes at 20°C
Foot Traffic: 24 hours at 20°C
Light Traffic: 3 days at 20°C
Fully Cured: 7 days at 20°C
Cleaner / Thinner:

Clean all tools and application equipment with Sika Thinner C immediately after use.

Shelf Life: 12 months from date of production.
Packaging:

Available in 25 Kg

Related Products