£7.75 delivery on orders excluding certain products & postcodes *
*Sika Sikafloor 2540W Solvent Free Epoxy Resin Coating
SKU
ID4062
***
This product is now discontinued. Formerly Sikafloor 2530W.
In stock
Product Description
Please note, this product is now discontinued. It has been replaced with Sika Sikafloor SR 2510W.
Sikafloor 2540W (formerly Sikafloor 2530W) is a solvent free floor paint for warehouses, car parks, factories, decks and garages. Section 12 approved. LU APR No. 345
Sikafloor 2540W (formerly Sikafloor 2530W) is a 2 pack, water based, solvent free, epoxy resin coating that is an odourless application with a chemical and mechanical resistant finish. Suitable for cement screeds, broadcast systems and epoxy mortars. It is approved for London Underground Section 12 use.
Best Uses
Sikafloor 2530W is best used in production areas, warehouses, car parks, factories, workshops and garages to give a high performance low odour finish with a theoretical coverage rate of 5 square metres per Kg per coat.
Application
Sikafloor 2530W can be applied using a brush or roller and can be re-coated after 12 hours (at 20°C) of application. It provides an attractive finish that provides a protective surface.
Surface and Environment
Sikafloor 2530W has been specially designed for use on concrete, cement screeds, broadcast systems and epoxy mortars and conforms to the requirements for physiological harmlessness set by the federal health office, making it ideal for use on interior surfaces in industrial and commercial environments.
Technical Details
Approvals
- Approved for London Underground Section 12
- LU APR No. 345
- Water based epoxy seal coating according to EN1504-2: 2004 and EN 13813:2002, DoP 02 08 11 01 002 0 000008 2017, certified by Factory Production
Control Body No. 0921, certificate 2017, and provided with the CE-mark - ISEGA Certificate of Conformity 35982 U 13, July 2013
- Bfl-s1 fire classification in accordance with EN 13501-1, Report-No. PB-Hoch-130018, Germany, December 2012
- Particle emission certificate Sikafloor-2540 CSM Statement of Qualification – ISO 14644-1, class 4–Report No. SI 1212-624 and GMP class A, Report No.
SI 1212-624 - Outgassing emission certificate Sikafloor-2540W: CSM Statement of Qualification – ISO 14644-8, class 9.6 - Report No. SI1212-624
- Good biological Resistance in accordance with ISO 846, CSM Report No. 1212-624
- Eurofins Emission tested according to the AgBBscheme and guidelines of the DiBt (AgBB – Committee for Health-related Evaluation of Building Products, DiBt – German Institute for Building Technology). Sampling, testing and evaluation were performed according to ISO-16000, Report No. G20152B
- Eurofins Emission tested according to the Emicode EC1+-scheme , Report No. G19919B
- Eurofins Emission tested according to M1 Protocol, Report No. 392-2014-00087005D
- Eurofins Emission tested according to French Label,Report No. 392-2014-00087005A
Systems
Sika Sikafloor 2540W is used within the following Sika systems:
- Sikafloor MultiDur WS-10
- Sikafloor MultiDur WT-10
See Data Sheets tab for System sheet downloadable PDF
Notes
- Sikafloor-2540W can be subjected to normal to medium heavy mechanical and chemical loading
- Formerly known as Sikafloor 2530W
- For production areas, warehouses, car park decks and garages, etc.
- Good chemical and mechanical resistance
- Water vapour permeable
- Low odour
- Solvent free
- Water dilutable
- Odourless
- Easy application
Technical Info
| Components: | Two Part |
| Type: | Water Based Epoxy |
| Finish: | High Gloss, Satin and Flat (Black and White) |
| Stock Colours: | Range of standard colours only |
| Tintable: | No |
| VOC Content: | 140.0g per Litre |
| Volume Solids: | 43% |
| Suitable Substrates: | For metal surfaces primed with Rustoleum Alkyd Primers |
| Application Method: | Short Pile Roller |
| Theoretical Coverage: |
0.2 - 0.3 Kg per m2 applied as a roller coating
|
| Wet Film Thickness (WFT): | - |
| Dry Film Thickness (DFT): | - |
| Induction Time: | - |
| Pot Life: | 90 minutes at 20°C |
| Touch Dry: | |
| Overcoatable: | Between 20 hours and 5 days at 20°C |
| Fully Cured: | 7 days at 20°C |
| Cleaner / Thinner: | - |
| Shelf Life: | 12 months from date of production |
| Packaging: | Available in 18 Kg |
Related Products
RODO ProDec Double Arm Roller Refills - 12 Inch
Replacement rollers for water based and solvent based floor paints.
From
£10.44
£8.70
Centrecoat WFT Wet Film Thickness Comb Gauge
An important tool to measure the depth of paint and coatings applied to substrates to ensure the correct thicknesses are applied.
£2.34
£1.95
Sika Extender T
A white powder compound added to Sika floor paint when Quartz Sand Aggregates are to be added.
£80.17
£66.81
Remmers Epoxy HB Color
A 2 pack, heavy duty floor paint for garages, workshops and warehouses. FeRFA Type 3 System.
From
£204.60
£170.50
Centrecoat Industrial Floor Paint Application Pack
Contains everything you need to professionally apply paint to floors - except the paint!
£108.12
£90.10
RODO ProDec Double Arm Roller Frames
Professional Quality Double Arm Roller Frames used when painting floors or walls.
From
£12.31
£10.26
Remmers QP Color
A very fast reacting pigmented coating for use as either a base coat or top sealant in Remmers flooring systems.
From
£380.52
£317.10
Centrecoat ArmourCoat HB 3-400
A two part gloss, epoxy floor coating. A tough, hard wearing finish for medium duty traffic floors. FeRFA Type 3 Approved.
From
£79.44
£66.20