Sikafloor ProSeal is a curing compound which cures, seals and provides and abrasion resistant, anti-dust coating to new concrete surfaces,
Sikafloor ProSeal is a solvent based, clear acrylic resin polymer solution which is used to cure, harden and seal fresh or hardened concrete.
Best Uses
Sikafloor ProSeal is used for curing and sealing fresh concrete floors. Sika Sikafloor ProSeal is a curing compound that limits the drying and cracking of new concrete surfaces and also provides an anti-dust treatment and improvement in the abrasion resistance of existing concrete surfaces. It is suitable for interior and exterior applictions.
Sikafloor® ProSeal is used for optimum curing and sealing of fresh concrete floors and structures
Curing compound in order to limit surface drying and cracking
Provides curing and sealing for Sikafloor® dry shake hardeners
Anti-dust treatment and improvement of the abrasion resistance of existing concrete surfaces
Suitable for exterior and interior application
Excellent moisture retention
Curing Efficiency to ASTM C - 156 is 75%
Good adhesion to old and new concrete
Quick drying
Helps control dusting for both new and existing concrete floor surfaces
Effectively cures and seals concrete surfaces in a single, economic operation
Non yellowing
Easy application by spray or roller
Application
Fresh concrete surfaces must be free of bleed water and have sufficient strength to withstand finishing operations. Hardened or old concrete must be prepared by high pressure jet wash or abrasive blast cleaning. All dust, loose and friable material must be completely removed from all surfaces. After mixing with a low speed electric stirrer, Sikafloor ProSeal can be applied in a continuous even film by low pressure spray. Application is also possible by brush or roller. Please see the Sikafloor ProSeal Product Data Sheet for more information.
Surface and Environment
Sikafloor ProSeal is a clear liquid that cures, hardens and seals concrete surfaces. It is particularly useful at inhibiting dust and improving the abrasion resistance of the substrate.
Tested for water retention according to ASTM C-156 for curing liquids type 1, class
Conforms to the requirements of EN 13813 SR - B 1.5. Epoxy textured roller and seal coat according to EN 13813:2002, DoP 02 08 03 04 005 0 000004 1049 and provided with the CE-mark
Technical Info
Components:
One Part
Type:
Solvent based Acrylic Resin
Finish:
Stock Colours:
Clear
Tintable:
No
VOC Content:
Volume Solids:
Suitable Substrates:
For used to cure, harden and seal fresh or hardened concrete
Application Method:
Brush, Roller, Low Pressure Spray
Theoretical Coverage:
0.1 - 0.25 litres per m2 per coat
Wet Film Thickness (WFT):
Dry Film Thickness (DFT):
Induction Time:
Supplied ready for use. Stir thoroughly before use for a minimum of 2 minutes using a low speed electric stirrer (~300 rpm).