*Sika Sikagard 670W Elastocolor

Name: *Sika Sikagard 670W Elastocolor
Brand: Sika
SKU: ID22823
Availability: InStock

SKU

ID22823

***

This product is now discontinued.

In stock

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Product Details

Product Description

Please note this product has now been discontinued. Please see Sikagard 675W as a possible alternative, or call our Technical Team on 01462 421333 for further advice.

Sika Sikagard® 670W Elastocolour is a one component anti-carbonation coating which protects concrete substrates against ageing and weathering.

Sikagard® 670W ElastoColor is a one part acrylate anti-carbonation coating which can be applied directly to concrete surfaces. Sikagard® 670W ElastoColor complies with the requirements of EN 1504-2 as a protective coating. Sikagard® 670W ElastoColor is solvent free and environmentally friendly.

Best Uses

Sikagard® 670W ElastoColor is used for the protection and enhancement of standard and lightweight concrete structures. Sika Sikagard® 670W ElastoColor is used as a protective coating for existing soundly adhering coatings.

Application

Sikagard® 670W ElastoColor is easy to apply by brush, roller or airless spray. The application temperature must be at least 3°C above dew point. Sikagard® 670W ElastoColor should not be thinned unless the first coat is to be used as a primer.

Surface and Environment

Sikagard® 670W ElastoColor is water vapour permeable and provides very good resistance against weathering and ageing. It prevents water ingress and has a high diffusion resistance to carbon dioxide. Surfaces must be clean and dry and free from loose and friable particles. New concrete must be at least 28 days old.

Technical

Technical Details

Approvals

Conforms to EN 1504-2 requirements

Technical Info

Components:	One Part
Type:	Acrylic Anti Carbonation Coating
Finish:	High Gloss, Satin and Flat
Stock Colours:	Thixotropic liquid available in white RAL 9003 only
Tintable:	No
VOC Content:
Volume Solids:	60%
Suitable Substrates:	Can be applied over existing coatings or directly onto the concrete surfaces
Application Method:	Brush, Roller or Airless Spray
Theoretical Coverage:	0.18 - 0.23 Kg per m2 per coat
Wet Film Thickness (WFT):	Depends on System
Dry Film Thickness (DFT):	Depends on System
Induction Time:	-
Pot Life:	-
Touch Dry:
Overcoatable:	After 1 hour minimum at 20°C
Fully Cured:
Cleaner / Thinner:	The product is supplied ready for use and must be not thinned unless the 1st coat is used as a primer (refer to coating system tructures). In these instances, add up to 2 - 5% of water and mix thoroughly. Un-thinned material must be stirred up thoroughly prior to application.
Shelf Life:	12 months from date of production if stored properly in undamaged and unopened original sealed packaging in cool and dry conditions. Protect from direct sunlight and frost.
Packaging:	Available in 20 Litres