Teamac P101 High Performance Marine Gloss

SKU
ID3380
Part A: UN1993 (Class: 3, Pk Grp: III), Part B: UN1866 (Class: 3, Pk Grp: III)
A scratch resistant mirror finish, non yellowing gloss boat paint for hulls and decks.
Available in 1 and 5 Litres
From £64.14 £53.45
In stock
Only %1 left
Product Description

Teamac High Performance Marine Gloss is a 2 pack high performance durable Marine Topcoat that can extend the lifespan of your boat. A polyurethane paint for Boats and Boat Hulls, that will not fade or yellow when exposed to high levels of UV light.

Teamac P101 Polyurethane Hull Paint is a 2 pack polyurethane paint for Boats and Boat Hulls, a high gloss light stable aliphatic polyurethane which will not fade or yellow when exposed to high levels of ultraviolet light. Teamac P101 Polyurethane Hull Paint is part of Promain's extensive range of Marine Gloss Paints that can provide boats and boat hulls with a decorative, protective finish. Once applied, Teamac P101 Polyurethane Hull Paint can be easily cleaned of surface contaminants.

Best Uses

P101 Polyurethane Hull Paint is ideally suited for use in the marine environment, where boats need to remain aesthetically pleasing on the eye and the growth of fungi and algae needs to be destroyed. Teamac P101 Polyurethane Hull Paint will not allow fungus to grow and will work to prevent barnacles attaching themselves to the hulls of the boat also.

Application

Prior to application all surfaces should be laitance free, clean, dry, sound and free from contaminants.

The product is supplied in two containers: one larger container which is labelled 'Base' and a smaller container labelled 'Hardener'. The contents of the pack marked 'Hardener' are added to the contents of the larger pack marked 'Base'. These should be thoroughly mixed together, preferably by slow speed electric mixer, for 2 minutes or until thoroughly mixed. Failure to mix the material correctly will lead to uncured areas in the coating.

Apply between 5 to 30°C by brush or short nap mohair roller.

Surface and Environment

P101 Polyurethane Hull Paint has been specifically designed for the outdoor environment in different aspects of the marine world and works well to protect surfaces against the effects of UV light whilst remaining waterproof. Use Teamac P101 Polyurethane Hull Paint Marine Gloss on GRP, Wood, Ferro Concrete and suitable primed metals.

 

IMPORTANT NOTICE: From 24th August 2023, adequate training is required before industrial or professional use of this product. Training can be accessed at: https://www.safeusediisocyanates.eu

Technical Details

Features

  • P101 will not fade or yellow when exposed to high levels of ultra violet light
  • Teamac P101 2 pack polyurethane paint is used as a coating that will not support fungus growth
  • Teamac P101 is easily cleaned of surface contaminants
  • Apply brush, roller or spray
  • A light stable clear/coloured aliphatic polyurethane coating which will not fade or yellow when exposed to high levels of ulta violet light
  • For marine applications on GRP, wood, ferro concrete and suitably primed metals
  • Can be used over compatible water based paints
  • Not for use over conventional solvent based paints.

Technical Info

Components: Two Pack
Type: Polyurethane Coating
Finish: Gloss
Stock Colours: Arctic Blue, Cypress Green, Golden Yellow, Oxford Blue, PO Red, Regency Cream
Tintable: Yes. Please note, bespoke tints are non refundable / exchangeable
VOC Content: 498 g/litre
Volume Solids: 47%
Suitable Substrates: GRP, Metal (primed), Wood, Ferro Concrete
Application Method: Brush, Roller, Airless Spray
Theoretical Coverage: 7 Square Metres Per Litre
Wet Film Thickness (WFT): 120 to 135 microns
Dry Film Thickness (DFT): 55 to 65 microns
Induction Time: -
Pot Life: 6 to 8 hours at 20°C
Initial Cure: 3 to 4 hours at 20°C
Hard Dry: 16 to 24 hours at 20°C
Fully Cured: 5 to 7 days at 20°C
Cleaner / Thinner: Do not Thin. Clean tools with Anti Graffiti Brushwash
Shelf Life: -
Packaging: Available in 1 and 5 Litres

Related Products