Teknos Futura 90 Gloss Furniture Paint

SKU
ID20239
UN1263 (Class: 3, Pk Grp: III)
Suitable for top coating furniture with wooden and primed metal surfaces.
Available in 0.9 and 2.7 Litres. Tintable to RAL and BS Colours as well Teknos inhouse colours
From £17.02 £14.18
In stock
Only %1 left
Product Description

Teknos Futura 90 is a thixotropic urethane alkyd furniture paint with a full gloss finish.

Best Uses

Futura 90 is suitable for top coating of wooden and primed metal surfaces on detached furniture both indoors and outdoors.

Application

The surface to be painted must be clean. Wash previously painted surfaces with Rensa Super paint cleaner. Remove loose and poorly adherent paint coats. Use a wire brush to remove any rust from the metal surfaces. Sand any hard or gloss surfaces and remove the dust. Fill pits and crevices with Silora A Carpentry Filler. Matt down the surfaces and remove the dust. Prime metal surfaces with Ferrex Anticorrosive Paint. Prime unpainted wooden, chipboard and also surfaces that have been painted with alkyd, oil or acid-curing paint with Futura 3 Adhesion primer.

The paint is thixotropic and must be stirred thoroughly before use. Apply by brush, roller or spray. Suitable airless spray nozzle is 0.011 - 0.013". When applying by spray, if needed, thin the paint 5 - 15 percent by volume with Teknosolv 9500. When a second coat is required, it can be applied on the following day.

Application conditions: The surface to be painted has to be dry. During the application and drying period the temperature of the ambient air, the surface and the paint shall be above +5°C and the relative air humidity below 80%.

Technical Details
Components: Single Pack
Type: Thixotropic urethane alkyd paint
Finish: Gloss
Stock Colours: Teknos Interior Colours
Tintable: Yes to RAL, BS Shades. Please note, bespoke tints are non refundable / exchangeable
VOC Content: The product is not included in the EU VOC directive
Volume Solids: 54%
Suitable Substrates: Wooden and primed metal surfaces
Application Method: Brush, Roller or Airless Spray (Suitable airless spray nozzle is 0.011 - 0.013")
Theoretical Coverage: 8 - 12 m²/l applied once onto a smooth surface
Density: Approx 1.1 g/ml
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Touch Dry: After 4 hours at 23°C
Overcoatable: After 24 hours at 23°C
Fully Cured: -
Cleaner / Thinner: Teknosolv 1621 or in spray Teknosolv 9500
Shelf Life: -
Packaging: Available in 0.9, and 2.7 Litres

Related Products