Teknos Aquafiller 2800 Sanding Sealer is an air-drying primer for wood, MDF, masonite and chipboards, for interior use.
Teknos Aquafiller 2800 is used as an air-drying primer for wood, MDF, masonite and chipboards. It is for interior use and can be overcoated with Teknos Teknocoat 1633, Teknos Aquacoat 2650 and Teknos Aquacoat 2670.
The wood must be free from wood dust and contamination. The filler can be applied using an air, airless or airmix sprayer. Certain timbers such as cedar, ash, oak, mahogany etc. contain waterborne extractives, which can leach through the coating and stain opaque finishes.Please contact our technical department for further information.
- Good anti-blocking properties
- Good sanding properties
- Good substrate preparations for subsequent coatings
|Finish:||2800-00 = Matt, 2800-02 = Semi Gloss|
|Stock Colours:||White and Clear|
|VOC Content:||Matt = 5 g/l, Semi Gloss = 7 g/l|
|Volume Solids:||Matt = 808 g/l, Semi Gloss = 370 g/l|
|Suitable Substrates:||Wood, MDF, masonite and chipboards|
|Application Method:||Air, Airless or Airmix/Aircoat Spray|
|Theoretical Coverage:||Approx 10 m²/l|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Touch Dry:||30 minutes at 20°C|
|Abrasive Dry:||After 1 hour at 20°C|
|Cleaner / Thinner:||Water|
|Storage:||Store in a tightly closed container|
|Packaging:||Available in 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.