Teknos Teknocryl Aqua 2940 is an air drying, water borne topcoat for direct adhesion onto most powder coated surfaces and ABS and polystyrene plastic.
Teknos Teknocryl Aqua 2940 is a resistant to oil and water coating for electrophoresis powder coated surfaces and certain plastics. An ideal product as a cosmetic coating for previously powder coated surfaces such as frameworks or chassis.
The substrate must be free from grease, rust and mill scale. A repair on top of earlier treated surfaces we recommend a slight grinding. Adhesion and any attack at the painted surface should be tested before final coating of the surface. The surface to be painted must be dry. When coating and curing the temperature of the air, paint and surface must be above 15°C and the relative air humidity below 70%.
Apply using air spraying equipment. Adhesion to the substrate should be tested before production as different varieties may occur depending on the type of substrate / plastic.
|Tintable:||Yes, tintable to RAL, BS and NCS colours. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||64.0g per Litre|
|Suitable Substrates:||For powder coated surfaces, ABS and PS plastics|
|Application Method:||Air Spray|
|Theoretical Coverage:||14 m2 per litre|
|Wet Film Thickness (WFT):||70 microns|
|Dry Film Thickness (DFT):||30 microns|
|Touch Dry:||20 minutes at 23°C|
|Cleaner / Thinner:||Water|
|Packaging:||Available in 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.