Teknos Siloksan Façade

SKU id18439 Non Hazardous
A water-borne, full-matt silicone emulsion based masonry paint for mineral surfaces.
Available in 2.7, 9 and 18 Litres
£22.16 (£26.59 Inc VAT)
*These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.
£22.16 (£26.59 Inc VAT)

Product Description

Teknos Siloksan Façade is a water-borne, full-matt silicone emulsion based masonry paint for mineral surfaces. The paint is very permeable and water-repellent. It is free of solvents that contain aromatics.

Best Uses

Teknos Siloksan Façade is formulated for use on mineral external masonry such as concrete, plaster, lime-sand brick, lime based renders and mineral boards. Suitable for application onto new and previously painted facades outdoors.

Teknos Siloksan Façade silicone emulsion paint is easy to apply with roller or spray. Its binder composition prevents the paint from becoming brittle by the action of UV-light or heat. As Teknos Siloksan Façade is water-repellent it keeps clean even in urban climate, and acid gases in the atmosphere do not corrode it. Teknos Siloksan Façade can be overcoated the same day . It does not require any separate priming coat on most unpainted or previously painted surfaces, when Teknos Silosan Gel is added into the paint for the first coat.

  • CE Approved
  • Suitable for lime surfaces
  • Permeable
  • Water repellant
  • Anti Carbonation

Application

NEW SURFACES:
New concrete element or cast surfaces can be painted with SILOKSAN FACADE when a minimum of one month has passed after the casting, the surface is completely bound and no longer wet or matt moist. In measurements the moisture values of the concrete must be under 97% as relative humidity (RH) or 4% as
per cent by weight. It is recommended that new plaster surfaces are coated only after a hardening time of 6-8 weeks. Remove all dirt from the surfaces by cleaning with high pressure washer. When needed, add sand  to the washing water or use a steel brush or similar in order to achieve sufficient surface profile (e.g. mould-cast
surfaces).NOTE! When painting concrete elements take care of removing the laitance before painting. When handling substrates containing asbestos, regulations given by authorities must be followed.

PREVIOUSLY PAINTED SURFACES:
Remove flaking and poorly adherent or pulverized (e.g. lime wash) paint coats from previously painted surfaces. The method to be used is chosen depending on the strength of the substrate and the type of the paint to be removed (e.g. wire-brushing, hot pressurized-water cleaning or water-sand cleaning). Remove also poorly adherent, brittle plaster and concrete surfaces. Check the condition of the concrete seams and repair where required. If concrete constructions have cracks by the reinforcement bars, these cracks are to be opened by e.g. chipping or with a grinding machine. After this the concrete is roughened, if required. Clean all rust from the
exposed steel bars and  protect them with e.g. a coat of Teknos Inerta Mastic epoxy coating. Use appropriate mortar, on plaster surfaces repair mortar, to repair the opened cracks and dents. Finish the repaired areas carefully and let them harden before they are painted.

Before use stir the paint thoroughly.

Prime clean and solid mineral surfaces with Teknos Siloksan Façade Silicone Emulsion Paint with an addition of Teknos Siloksan Gel (9 : 1). For priming the paint may be diluted by 5% with water. This priming can also be used for previously painted surfaces.

Recommended Products To Use


Teknos Siloksan Gel Additive

Teknos Siloksan Gel Additive

A water-borne gel containing polysiloxane for use together with Teknos Siloksan Façade Silicone Emulsion Paint on mineral ...

£40.81 (£48.97 Inc VAT)