Treatex Hardener Additive for Treatex Floor Oil to increase wear-ability.
Treatex Hardener has been designed especially for use with Treatex Floor Oil and when mixed together, the strength and durability of the floor becomes tougher and harder wearing.
Treatex Hardener works well to increase the mechanical resistance to hard flooring found in heavy trafficking environments and can be used with one or both coatings of Treatex Hardwax Oil.
Treatex Hardener can be applied simply by mixing the two products together in a container at a ratio of 10:1 with 1 part being the Hardener.
Surface and Environment
Treatex Hardener has been designed for use with Hardwax Oil on timber surfaces found in internal environments.
- Raises the scratch resistance by approx 10%
- Treatex Hardener can be used in one or both coats of Treatex Hardwax Oil Clear
- Adding Treatex Hardener to Treatex Hardwax Oil starts a chemical reaction which can't be stopped, the mixture will set in the tin even with the lid on
- The mixture remains usable for up to three hours, so only mix enough for one coat at a time
- Pot life 3 hours
- Mix ratio: 10:1.
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.