Zinga Zingatarfree is a one pack moisture curing, polyurethane, MIO paint designed to replace normal cold tar products with the Zinga system on immersed or embedded in soil structures such as electricity pylon legs.
System reaches ISO 12944 in immersion in salt or brackish water or in the ground with a life expectancy of 15 years with ZINGA 1 x 60-80 µm DFT and Zingatarfree 2 x 100 µm DFT. For more info please contact our technical team.
Zinga Zingatarfree (Formerly PU Tarfree MIO) is recommended over Zinga 96%. Suitable applications include narrow boat hulls, tug boats, on the base of electricity pylons legs, truck chassis etc. Zingatar free has an extremely high resistance to salts (especially chlorides) and water penetration.
When the waiting time between the successive coats is abnormally prolonged or in extremely polluted areas, the Zinganised surface can become contaminated. All contaminations that hamper the adhesion of the paint should be removed by appropriate means. Surfaces contaminated with oil and grease should be washed
down with solvent, alkaline solutions or emulsifier. Salt deposits or other water-soluble contaminations should be removed with water and brush, water under high pressure or steam. Possible white rust on ZINGA should be removed with water and rigid nylon brush.
Zingatarfree can be applied on top of standard Zinga by brush, roller, conventional spray gun or airless spray. It is recommended to treat corners, sharp edges, bolts and nuts as a stripe coat prior to applying a uniform coat. Dilute 5 to 10% with Zingasolv if using a brush and roller. With a spray gun, dilution of 10-15% can be either made using Zingasolv or Thinner 41.
- Tested to ISO 12944 in immersion in salt or brackish water or in the ground with a life expectancy of 15 years with ZINGA 1 x 60-80 µm DFT and Zingatarfree 2 x 100 µm DFT
- Dilute with 10-15% Zingasolv for brushes or rollers, or Zingasolv / Thinners 41 for spray guns
- Ambient Temperature should be between 0°C and 35°C
- Surface Temperature should be a minimum of 3° above dew point
- Relative humidity should be between 30 - 98%
|Type:||Moisture Curing Polyurethane|
|Tintable:||Light Grey on Request. Please note, bespoke tints are non refundable / exchangable.|
|VOC Content:||295.0g per Litre|
|Suitable Substrates:||Must be applied on top of ZINGA 96% only|
|Application Method:||Brush, Roller, Conventional Spray or Airless Spray|
|Theoretical Coverage:||8.3 m2 per litre at 80 microns|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):||80 - 150 microns|
|Touch Dry:||2.5 hours at 20°C for 80 microns|
|Overcoatable:||Between 6 hours to 1 month at 20°C at 80 microns|
|Fully Cured:||A curing time of 3 days has to be respected before immersion of the
|Cleaner / Thinner:||Zinga Zingasolv|
|Shelf Life:||2 years unopened|
|Packaging:||Available in 1 and 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.