Zinsser Watertite Basement Waterproofing Paint is designed for damp proofing basements and protecting them from mould and mildew. It can withstand up to 34 lbs (2.3 Bar) of water pressure, which is twice the strength of other latex waterproofers.
A beautiful finish which is guaranteed to keep water out and mould and mildew away. Watertite Mould and Mildew- Proof Waterproofing Paint features an Ultra Low Odour oil-base formula that combines a state-of-the-art waterproofing resin, Portland cement, and other unique ingredients and antifungal agents. It guarantees a beautiful, smooth finish with twice the waterproofing strength of latex water proofers and a mould and mildew proof paint film for 5 years.
Zinsser Watertite Basement Waterproofing Paint is a ready to use coating formulated to waterproof interior and exterior concrete, stucco, cement, cinder block and other masonry surfaces. It is ideal for interior basement walls and for sealing concrete basement slabs prior to installing flooring (not recommended for regular foot traffic). It is also a great product for using on exterior foundations and retaining walls, above and below grade.
Zinsser Watertite Basements Waterproofing Paint can be applied using a brush, roller or airless spray for a quick and easy application to basement walls and areas which are affected by moisture and mould/mildew damage. Zinsser Watertite Basement Waterproofing Paint is available in 5 and 10 litre tins. On rough, porous masonry apply both coats at a rate of 2m2 per litre. On smooth, denser surfaces, and those previously painted, apply the first coat as above. The second coat can be applied at a rate of 2.5 m2 per litre.
Two coats must be applied to earn our warranty.
Zinsser Watertite Basements Waterproofing Paint has been specially designed for use in environments where dampness and mould is of great concern, primarily in basements. Zinsser Watertite Basements Waterproofing Paint forms an impermeable membrane barrier to water on interior or exterior, vertical or horizontal concrete block, cast-in-place concrete slab and cementitious stucco.
|Type:||Solvent Based Acrylic|
|Tintable:||Can be tinted to other off-white and pastel tones. Please note, bespoke tints are non-refundable / exchangeable.|
|VOC Content:||Less than 350.0g per Litre|
|Suitable Substrates:||Formulated to waterproof interior and exterior concrete, stucco, cement, cinder block and other masonry surfaces. It is ideal for interior basement walls and for sealing concrete basement slabs prior to installing flooring (not recommended for foot traffic). It is also great for exterior foundations and retaining walls, above and below grade.|
|Application Method:||Thick Polyester Bristle Brush, Napped Roller|
|Theoretical Coverage:||2 m2 per litre on rough surfaces, on smooth, denser surfaces, and those previously painted, apply the first coat as rough. The second coat can be applied at a rate of 2.5m2 per litre.|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Touch Dry:||1 hour at 20°C|
|Overcoatable:||After 4 hours at 20°C|
|Fully Cured:||7 - 14 days at 20°C|
|Cleaner / Thinner:||Zinsser BIN Brush Cleaner|
|Shelf Life:||3 Years Unopened|
|Packaging:||Available in 5 and 10 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.
A flat matt quick drying stain blocking paint with high resistance to new mould growth. Ideal for historic buildings and churches.
Solvent Based Stain Killer, high hiding formula. One coat is all that is needed to cover and seal most surfaces including suspended cei...
A Pliolite Exterior Masonry Paint. Use at low temperatures, -5°C. Showerproof in as little as 20 minutes
An interior/exterior adhesion primer that can be applied to all interior and exterior walls, ceilings, doors, trim, fascia, soffits, fo...