Jotun Mare Nostrum SP

SKU
ID21607
UN1263 (Class: 3, Pk Grp: III)
Very good fouling coating that assures a totally active surface continuously renewed providing a clean hull for the whole season.
Available in 2.5 and 5 Litres
From £100.80 £84.00
In stock
Only %1 left
Product Description

Jotun Mare Nostrum SP is a self polishing anti-fouling based on a unique binder combination system.

Best Uses

Jotun Mare Nostrum SP provides very good fouling protection and assures a totally active surface continuously renewed providing a clean hull for the whole season. After immersion in water the true colour will appear. Suitable for motor boats, sailing boats, and speed boats (40 knots +).

Jotun Mare Nostrum SP is not recommended for boats sailing only in fresh water. Only white colour is recommended for aluminium hulls when used as part of an approved system.

Self polishing anti-fouling allows the biocide and the resin are dissolved in a predictable rate. As a result there is always a new fresh layer of anti fouling in contact with the sea water keeping a regular leaching rate of the biocides throughout the whole service life of the product. All-round technology for most types of boats. Ideal for cruisers and sailing lovers.

Application

Prepare surfaces with grease, oil or other contamination, wash with recommended Jotun Yachting detergent. High pressure water wash the substrate. For best results, the substrate should be clean, dry and free from any contamination. Surfaces with self polishing anti-fouling in good condition, apply this product directly on the old anti-fouling. (Some products may be difficult to overcoat directly, and should be sealed with a coat of Jotun Vinyl Primer.

Surfaces with hard anti-fouling or any anti-fouling in bad condition, scraping and wet sanding down to sound substrate is necessary before applying this product. Surfaces with unknown anti fouling, scraping and wet sanding down to sound substrate followed by a recommended sealer is necessary.

Bare substrate to be treated with recommended primer system: Jotun AntiPest or Jotun Vinyl Primer. Refer to data sheet, direction for use for the selected Jotun Yachting product.

Apply 2 coats using roller, air spray or airless spray, or roller.

Some colour variation between batches may occur. Mix contents with different batch numbers before use to prevent shade variations.

Technical Details
Components: Single Pack
Type: Anti-Fouling
Finish:  
Stock Colours: Black, Dark Blue, Red, White
Tintable: No
VOC Content: 470 g/L
Volume Solids: 50%
Suitable Substrates: For boat anti-fouling
Application Method: Brush, Roller Air Spray or Airless Spray
Theoretical Coverage: 4.2 - 10 m2 per litre
Wet Film Thickness (WFT): 100 - 240 microns
Dry Film Thickness (DFT): 50 - 120 microns
Induction Time: -
Pot Life: -
Surface Dry: 5 hours at 10°C
Overcoatable: After 12 hours minimum at 10°C
Hard Dry: 16 hours at 10°C
Cleaner / Thinner: Jotun Thinner No.7
Shelf Life: 48 months at 23°C in original unopened containers.
Packaging: Available in 2.5 and 5 Litres

Related Products