FLAG Multi Purpose Metallic Primer

SKU
ID3719
UN1263 (Class: 3, Pk Grp: III)
For above and below the waterline on GRP fibreglass, wood, steel and ferro cement.
Available in 2.5 Litres in Grey
£36.13 £30.11
In stock
Product Description

FLAG Multi Purpose Metallic Primer Universal Primer is suitable for use above and below the waterline on all substrates and provide a good waterproofing and corrosion resisting performance.

Flag Multi purpose metallic primer can be used on boat hulls, topsides and superstructure and suitable for GRP Fibreglass, wood, steel and ferro cement. Flag Multi Purpose Metallic Primer is also suitable as a primer or barrier coat under Flag and other traditional anti-foulings.

Best Uses

FLAG Multi Purpose Metallic Primer can be used both above and below the waterline and has been designed to be used on boat hulls, topsides and superstructure. This multi purpose primer can be used not only with Flag products but also with other traditional anti-foulings and is also suitable for use on GRP Fibreglass, wood, steel and ferro cement and provides a good waterproofing and corrosion resisting performance.

Application

FLAG Multi Purpose Metallic Primer is easy to apply and relatively quick drying. You can apply the primer using either a brush, roller or spray, and it will be dry to touch in 2 hours. This primer has an overcoating time of 6 hours.

Surfaces and Environments

When applying Flag Multi Purpose Metallic Primer make sure that the surface you are applying it to is stable, firm, dry and free of dust, sand and loose old paint as well as being dirt, grease, oil and salt free and can be applied to boat hulls, topsides and superstructure.

Technical Details

Features

  • Flag Universal primer is suitable for above and below the waterline
  • For use on boat hulls, topsides and superstructure
  • Use on all substrates with good waterproofing and corrosion resisting performance
  • Also suitable as a primer or barrier coat under FLAG and other traditional antifoulings
  • Easy to apply and relatively quick drying

Technical Info

Components: One Part
Type: Solvent Based
Finish: Matt
Stock Colours: Grey
Tintable: No
VOC Content: -
Volume Solids: 60%
Suitable Substrates: For GRP, wood, steel and ferro cement.
Application Method: Brush, Roller, Conventional or Airless Spray
Theoretical Coverage: 12 m2 per litre
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Touch Dry: 2 hours at 20°C
Overcoatable: After 6 hours at 20°C
Fully Cured: -
Cleaner / Thinner: Flag Antifouling Thinners
Shelf Life: 2 years unopened in original packaging
Packaging: Available in 2.5 Litres