Rustoleum Galva Plus Zinc 2120 Aerosol

SKU
ID3160
UN1950 (Class: 2.1)
Rustoleum Galva Plus 2120 GALVAFROID galvanised zinc aerosol spray.
Available in 500ml Aerosols
£13.61 £11.34
In stock
Product Description

Rustoleum Galva Zinc 2120 500ml Aerosol Spray contains pure zinc and aluminium pigmentation and offers the appearance of a new metallic galvanised steel finish.

Rustoleum Galva Zinc 2120 500ml Aerosol Spray is part of our Metal Primer range, and offers excellent drying time and contains pure zinc and aluminium as pigmentation. Hard Hat Galva Plus Zinc Primer has an appearance similar to new galvanised steel giving the effect of a metallic finish.

Best Uses

Rust-Oleum Hard Hat Galva Plus 2120 Spray is a fast drying zinc/aluminium coating based on an epoxy ester resin. Rustoleum Galva Zinc 2120 500ml Aerosol Spray is intended for use as a single coat in light industrial exposures and corrosive environments and is suitable to use for touching up small areas of galvanised steel surfaces.

Application

Rustoleum Galva Zinc 2120 500ml Aerosol Spray should be shaken vigorously for at least one minute before use until the rattle of mixing is heard. When applying the product make sure you hold parallel to the surface at approximately 25cm away. Keep shaking the can throughout use. Use a back and forth motion when applying the spray. After you have finished your coating you can clean the valve by turning the can upside down and holding the spray button for 3-5 seconds.

Surface/Environment is it designed for?

Rustoleum Galva Zinc 2120 500ml Aerosol Spray is designed for touching up galvanised steel surfaces in light industrial exposures and corrosive environments. Rustoleum Galva Zinc 2120 500ml Aerosol Spray has a theoretical coverage rate of 1.7m2 per can, depending on the surface material.

Technical Details

Notes

  • This primer contains pure zinc and aluminium as pigments.
  • Hard Hat Galva Plus zinc primer has an appearance similar to new galvanised steel.
  • Galva Plus should be used as a single coat in light industrial exposures and corrosive environments.
  • It resists 310 hours of salt spray testing (DIN 500210 SS).
  • Rust-Oleum Hard Hat Galva Plus has lower zinc contents and more aluminium.

Technical Info

Components: Aerosol
Type: zinc/aluminium coating based on an epoxy ester resin
Finish: Matt, Metallic
Stock Colours: Silver
Tintable: No
VOC Content: 655 g/l
Volume Solids: -
Suitable Substrates: Used for touch-up of galvanised steel surfaces
Application Method: Aerosol Spray
Theoretical Coverage: 1,7 m² per spray can at 25 μm dry
Wet Film Thickness (WFT): 100 μm
Dry Film Thickness (DFT): 25 μm
Induction Time: -
Pot Life: -
Touch Dry: 15 minutes at 20°C
Overcoatable: After 48 hours at 20°C
Fully Cured: 7 days at 20°C
Cleaner / Thinner: -
Shelf Life: 3 years from date of production unopened
Packaging: Available in 500ml Aerosols