Hempel Hempadur Multi-Strength 45540

SKU id21232 Part A: UN1263 (Class: 3, Pk Grp: III), Part B: UN3469 (Class: 3.8, Pk Grp: III)
A two component pure epoxy paint which cures to an abrasion and corrosion resistant coating.
Available in 20 Litres
£200.56 (£240.67 Inc VAT)
*These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.
£200.56 (£240.67 Inc VAT)

Product Description

Hempel Hempadur Multi-Strength 45540 is a two component pure epoxy paint which cures to an abrasion and corrosion resistant coating. Applicable by standard heavy duty airless spray equipment.

Best Uses

Hempel Hempadur Multi-Strength 45540 is formulated as a maintenance and repair primer in Hempadur systems in severely corrosive environment. Formulated as a self-primed, high build coating primarily for maintenance of e.g. structural steel, tidal zones, jetty pillings and decks. Well suited for application under humid conditions and for early water exposure.

Application

Preparation For New Steel: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Abrasive blasting to minimum Sa 2½ (ISO 8501-1: 2007) with a surface profile corresponding to Rugotest No. 3, N9a to N10, preferably BN9a to BN10,
Keane-Tator Comparator, 2.0 G/S or ISO Comparator, Medium (G).

Preparation For Repair and Maintenance: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Remove all rust and loose material by wet or dry abrasive blasting or power tool cleaning.As an alternative to dry cleaning, wet abrasive
blasting or water jetting to min. Wa 2½ (ISO 8501-4:2006) (or according to specification), may be used. A flash-rust degree of maximum L (ISO 8501-4:2006) is acceptable before application. Feather edges to sound and intact areas. After wet abrasive blasting hose down the surface with fresh water and allow drying. Touch up bare spots with: specified HEMPADUR paint.

Use only where application and curing can proceed at temperatures above: 5°C/41°F. The temperature of the paint itself should be above: 15°C/59°F. Apply only on a dry and clean surface with a temperature above the dew point to avoid condensation. In confined spaces provide adequate ventilation during application and drying.

Hempel Hempadur 15590 may be used as a blast primer.

Recommended Products To Use


Hempel Thinner 08450

Hempel Thinner 08450

Perfect for use with the Hempadur range of marine coatings and can also be used to clean any painting tools.

£22.26 (£26.71 Inc VAT)