Please note, this product is now discontinued. Contact our technical team for a suitable alternative.
Teamac Smooth Deck Paint is a Smooth Finish Deck Paint for use on wooden, metal or GRP boats and Yachts.
Teamac Smooth Deck Paint is a Smooth Finish Deck Paint for use on wooden, metal or GRP boats and Yachts. Teamac Smooth Deck Paint is conventional, durable, protective and available in green, red or grey. Deck Paints are critical in ensuring that a Boats Decking is protected from the harsh elements and provide a safe surface that also protects the boat.
PROMAIN ARE DELIGHTED TO MAKE A DONATION TO THE ROYAL NATIONAL LIFEBOAT INSTITUTION FOR EVERY TIN OF TEAMAC DECK PAINT ORDERED THROUGH US.
Teamac Smooth Deck Paint is best used as a protective coating for Boat Decks as they are constantly exposed to the wear and tear of foot traffic and need to be safe to walk, stand or move about quickly on, especially when wet. Smooth Deck Paint is a popular product used in the Marine Environment and can be applied directly to GRP decks after abrading to give a good key.
Before application can begin, all surfaces to be clean, dry and free from oil, grease and various other contaminants. Existing surfaces should be sanded down if necessary and all grease should be removed. Smooth Deck Paint from Teamac can be applied using brush, roller or airless spray for a faster application process. After 5 hours the surface will be touch dry and ready for recoating after approximately 12 hours. 2 coats of Smooth Deck Paint will need to be applied. All loose and flaking materials will need to be removed.
Teamac Smooth Deck Paint has been designed for use on Boat Decking in order to provide users with a decorative, protective and durable finish. This product can be used on wooden, metal or glass fibre surfaces. Teamac Smooth Deck Paint is an overcoat and should be primed with Zinc Phosphate Primer when used on metal and Teamac Wood Primer when used on wood.
- Suitable for metal, wood or glassfibre boat and yacht decks
- Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates
- Existing painted surfaces should be cleaned, degreased and sanded to give key
- Remove all loose, flaking material and treat bare areas as new substrate
- Prime with Teamac Zinc Phosphate Primer on metal, Teamac Wood Primer on wood.
- Apply direct to GRP decks after abrading to give a good key
- Off-gloss finish available in Green, Grey and Red
|Stock Colours:||Red, Green and Grey|
|VOC Content:||395.0g per Litre|
|Volume Solids:||50 - 52.6%|
|Suitable Substrates:||For wood and metal|
|Application Method:||Brush, Roller or Airless Spray|
|Theoretical Coverage:||13 m2 per litre at 35 microns|
|Wet Film Thickness (WFT):||75 microns|
|Dry Film Thickness (DFT):||35 - 40 microns|
|Touch Dry:||5 hours at 20°C|
|Overcoatable:||After 24 hours at 20°C|
|Fully Cured:||5 - 7 days at 20°C|
|Cleaner / Thinner:||Teamac Thinners 14|
|Shelf Life:||2 years unopened in original packaging|
|Packaging:||Available in 5 and 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.