£7.75 delivery on orders excluding certain products & postcodes *
Jotun Penguard Tie Coat 100
SKU
ID17008
Parts A and B: UN1263 (Class: 3, Pk Grp: III)
Formally Jotun Penguard Tie Coat. A two component, polyamide cured, high molecular weight epoxy coating, specially designed as a tie coat / sealer.
Available in 18 Litres in Red
£263.36
£219.47
In stock
Product Description
Jotun Penguard Tie Coat 100 is a two component, polyamide cured, high molecular weight epoxy coating, specially designed as a tie coat / sealer on top of inorganic zinc silicate primers, galvanised steel and thermally sprayed zinc.
Best Uses
Jotun Penguard Tie Coat is a two component polyamide cured epoxy coating. It is suitable for structural steel and piping exposed to highly corrosive environments. Recommended for offshore environments, refineries, power plants, bridges, buildings and mining equipment. Formulated as a primer in a complete system in atmospheric environments.
Application
Jotun Penguard Tie Coat should be applied with an airless or conventional spray. The use of a brush is recommended for stripe coating or small areas. For Galvanised Steel prepare by light brush blasting using non metallic abrasive leaving a clean, rough and even pattern. For coated surfaces clean, dry and undamaged compatible coating.
Technical Details
Approvals
- Low Flame Spread in accordance with EU Directive for Marine Equipment. Approved in accordance with parts 5 and 2 of Annex 1 of IMO 2010 FTP Code, or Parts 5 and 2 of Annex 1 of IMO FTPC when in compliance with IMO 2010 FTP Code Ch. 8
- Norsok M-501 System 1 (Pre Qualified)
- Norsok M-501 System 2A
- Norsok M-501 System 5A (Pre Qualified)
- Norsok M-501 System 8B
Technical Info
| Components: | Two Part |
| Type: | Polyamide cured epoxy coating |
| Finish: | Semi Gloss |
| Stock Colours: | Red |
| Tintable: | No |
| VOC Content: | 519.0g per litre |
| Volume Solids: | 42% |
| Suitable Substrates: | Tie coat / sealer on top of inorganic zinc silicate primers, galvanised steel and thermally sprayed zinc |
| Application Method: | Air Spray, Airless Spray, Brush |
| Theoretical Coverage: | 17 - 8.4m2 per litre |
| Wet Film Thickness (WFT): | 60 - 120 microns |
| Dry Film Thickness (DFT): | 25 - 50 microns |
| Induction Time: | 30 mins at 23°C |
| Pot Life: | 4 hours at 23°C |
| Touch Dry: | 2 hours at 10°C |
| Overcoatable: | 18 hours at 10°C |
| Fully Cured: | 14 days at 10°C |
| Cleaner / Thinner: | Jotun Thinner No. 17 |
| Shelf Life: | 24 months for Part A, 48 months for Part B |
| Packaging: | Available in 20 Litres |
