Jotun Solvalitt

SKU
id16987
UN1263 (Class: 3, Pk Grp: III)
A one component physically drying silicone acrylic coating that is heat resistant up to 600°C.
Available in 5 Litres
From £130.14 £108.45
In stock
Only %1 left
Product Description

Jotun Solvalitt is a one component physically drying silicone acrylic coating that is heat resistant up to 600°C. Suitable as a primer, mid coat or finish coat in atmospheric environments.

Best Uses

Jotun Solvalitt is suitable for properly prepared carbon steel, galvanised steel, stainless steel and aluminium substrates. Designed as heat resistant coating. Suitable for insulated and non-insulated surfaces. Recommended in combination with an inorganic zinc silicate coating as primer, providing heat resistance up to 400°C.

Jotun Solvalitt provides stable colours up to 600°C, making it well suited as finish coat. Well suited on top of Solvalitt Zinc or inorganic zinc primers for improved corrosion resistance. Suitable for insulated (CUI) and non-insulated surfaces.

Application

To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry and free from any contamination. For carbon steel prepare to Sa2.5. For stainless steel prepare to Sa 2.5 cleanliness. For aluminium, dry abrasive blast clean to SSPCSP 13/NACE No. 6. For galvanised steel, light brush blast using non metallic abrasive leaving a clean, rough and even pattern. For coated surfaces, ensure it is clean, dry and undamaged while being an compatible coating.

Apply using air spray or airless spray. Use a brush for stripe coating or small areas. Care must be taken to achieve the specified dry film thickness. Roller may be used for small areas. Not recommended for first primer coat. Care must be taken to achieve the specified dry film thickness.

Technical Details

Approvals

  • Resistant to dry atmospheric heat of up to 600°C continuously
  • Norsok M-501 System 2A

Technical Info

Components: One Part
Type: Physically drying silicone acrylic coating
Finish: Matt
Stock Colours: Black
Tintable: Call Promain sales team to check upon specific colours. Please note, bespoke tints are non refundable / exchangeable.
VOC Content: 483.0g per Litre
Volume Solids: 43%
Suitable Substrates: Suitable for properly prepared carbon steel, galvanised steel, stainless steel and aluminium substrates
Application Method: Air Spray, Airless Spray, or Brush / Roller for stripe coating and small areas
Theoretical Coverage: 14 - 21 m2 per litre
Wet Film Thickness (WFT): 50 - 70 microns
Dry Film Thickness (DFT): 20 - 30 microns
Induction Time: -
Pot Life: -
Touch Dry: 45 mins at 10°C
Overcoatable: 5 hours at 10°C
Fully Cured:  
Cleaner / Thinner: Jotun Thinner No. 7
Shelf Life: 5 years
Packaging: Available in 5 Litres

Related Products