£7.75 delivery on orders excluding certain products & postcodes *
Carboline | Hempel | International Paints | Jotun | PPG | Sherwin Williams
Guide To Working In Confined Spaces
A two pack, high solids, high gloss topcoat for industrial use in offshore corrosive environments. Cures down to 0°C.
Immersion grade coating for steel and stainless steel. Cures down to 5°C. Tintable to a huge range of RAL and BS shades.
Immersion grade primer for use within a system for steel and stainless steel. Cures down to 5°C.
A single pack silicone high performance finish for areas exposed to extreme temperatures. Suitable for service from 204°C - 540°C.
Offers exceptional barrier protection and resistance to wet/dry cycling at elevated temperatures.
An ultra high solids epoxy that is designed as a liner for potable water. FDA approved.
Rapid / low temperature curing inorganic zinc product suitable for C3 - CX and immersion environments.
A fast-curing, heavy duty, high-build anti-corrosive coating for marine and other corrosive environments.
A versatile tank lining suitable for low temperature application down to 2°C. NORSOK 7a Approved.
A glass reinforced chemically resistant epoxy coating with wide versatility in all industrial markets.
Formulated specifically to provide corrosion protection for the subsea market.
A fast drying, rapid recoat, metallic zinc-rich epoxy primer. Replacement for Interzinc 52.
A two component protective coating for use in high traffic, atmospheric and immersed environments.
A single pack polysiloxane topcoat formulated to give a cosmetic finish with superior colour and gloss retention. NORSOK approved.
A two component surface tolerant, high solids, high build coating. NORSOK approved.
A two component, high solids polyamine adduct cured zinc rich epoxy primer. Meets Norsok M-501 Rev. 6, System 1.
A two component solvent free amine cured phenolic/novolac epoxy coating. Specially designed tank lining with very good chemical resistance.
A two component micaceous iron oxide pigmented polyamide cured epoxy primer/sealer/coating.
A self-priming, two-component, high build, pure epoxy paint which cures to an abrasion and corrosion resistant coating.
A single pack, aluminium pigmented silicone resin coating that is heat resistant up to 540°C.
Epoxy barrier coat designed to give long term protection. LuL APR No. 2081.
Two component polyamide-adduct epoxy paint providing a protective coating to steel & metal surfaces in severely corrosive environments.
A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail approved. Highways Approved Item No 168
Formally PPG SigmaDur 568. A 2 Part High Solids, High Build Polyurethane Gloss Finish.
Formerly Amercoat 450E, Amercoat 450S. A two pack PU Gloss Finish for steel. Item No.168. M24(XM92).
A 2 pack structural steel and piping coating that will continue to cure while immersed.