£7.75 delivery on orders excluding certain products & postcodes *
Carboline | Hempel | International Paints | Jotun | PPG | Sherwin Williams
Guide To Working In Confined Spaces
A two pack, high solids, high gloss topcoat for industrial use in offshore corrosive environments. Cures down to 0°C.
Immersion grade coating for steel and stainless steel. Cures down to 5°C. Tintable to a huge range of RAL and BS shades.
Immersion grade primer for use within a system for steel and stainless steel. Cures down to 5°C.
A single pack silicone high performance finish for areas exposed to extreme temperatures. Suitable for service from 204°C - 540°C.
Offers exceptional barrier protection and resistance to wet/dry cycling at elevated temperatures.
An ultra high solids epoxy that is designed as a liner for potable water. FDA approved.
Rapid / low temperature curing inorganic zinc product suitable for C3 - CX and immersion environments.
A fast-curing, heavy duty, high-build anti-corrosive coating for marine and other corrosive environments.
A versatile tank lining suitable for low temperature application down to 2°C. NORSOK 7a Approved.
A glass reinforced chemically resistant epoxy coating with wide versatility in all industrial markets.
Formulated specifically to provide corrosion protection for the subsea market.
A fast drying, rapid recoat, metallic zinc-rich epoxy primer. Replacement for Interzinc 52.
A two component protective coating for use in high traffic, atmospheric and immersed environments.
A single pack polysiloxane topcoat formulated to give a cosmetic finish with superior colour and gloss retention. NORSOK approved.
A two component surface tolerant, high solids, high build coating. NORSOK approved.
A two component, high solids polyamine adduct cured zinc rich epoxy primer. Meets Norsok M-501 Rev. 6, System 1.
A two component solvent free amine cured phenolic/novolac epoxy coating. Specially designed tank lining with very good chemical resistance.
A two component, moisture curing, zinc rich silicate coating used as a tank coating to provide excellent solvent and chemical resistance.
A two component micaceous iron oxide pigmented polyamide cured epoxy primer/sealer/coating.
A rapid return to service, high build, edge retentive tank lining for prepared steel or concrete surfaces industrial and marine exposures.
An ultra high solids epoxy novolac amine engineered specifically for immersion service in storage tanks.
A self-priming, two-component, high build, pure epoxy paint which cures to an abrasion and corrosion resistant coating.
A single pack, aluminium pigmented silicone resin coating that is heat resistant up to 540°C.
Epoxy barrier coat designed to give long term protection. LuL APR No. 2081.
Two component polyamide-adduct epoxy paint providing a protective coating to steel & metal surfaces in severely corrosive environments.
A high solids, tin free, PU with fast drying and high gloss attributes for use where long term exterior gloss and colour retention is required.