PPG Phenguard Subsea 780 - Formerly SigmaLine 780

SKU
id3939
Part A: UN1263 (Class: 3, Pk Grp: III), Part B: UN3469, (Class: 3, Pk Grp: III)
A two component amine adduct cured phenolic epoxy finish designed to provide a finish coat as part of a coating system used for the protection of subsea equipment.
Available in 4 Litres
From £201.89 £168.24
In stock
Only %1 left
Product Description

PPG Phenguard 780 Subsea (Formerly SigmaLine 780) is suitable for marine applications that will be immersed in water, offering protection against corrosion and rusting, available in a selection of bright colours that can easily be located by ROV.

PPG SigmaLine 780 is a two component amine adduct cured phenolic epoxy finish designed to provide a finish coat as part of a coating system used for the protection of subsea equipment.

Best Uses

PPG SigmaLine 780 is suitable for marine applications that will be immersed in water, and works well to protect the surface to against these adverse conditions. Due to subsea equipment constantly being used in underwater facilities, it needs to be coated with a product that protects against corrosion and rusting. SigmaLine 780 is the ideal product suitable for the job, and is available in a selection of bright colours that can easily be located by ROV.

Application

PPG SigmaLine 780 can be applied using air or airless spray and offers a theoretical coverage rate of 6.6m2. SigmaLine 780 has a touch dry time of 2 hours and can be overcoated after 24 hours, to provide a high quality, protective and decorative finish.

Surface and Environment

PPG Phenguard 780 Subsea (Formerly SigmaLine 780) has been specifically designed for use in the marine environment and used in underwater conditions on a variety of different subsea equipment. SigmaLine 780 offers excellent resistance to high temperatures when applied to equipment in immersed conditions.

Technical Details

Approvals

  • Norsok M-501 System 7C (Pre Qualified)

Systems

PPG Phenguard Subsea 780 is used within the following PPG systems:

  • PPG P532 System - Systems For Application and Repair Subsea
  • PPG P110 System - Systems For Application and Repair Subsea

See Data Sheets tab for System sheet downloadable PDF.

Features

  • Two component amine adduct cured phenolic epoxy finish
  • Finish coat for coating system used for the protection of subsea equipment
  • Bright colour to assist location by ROV
  • Excellent resistance to seawater immersion
  • Very good corrosion control
  • Excellent high temperature resistance in immersed conditions
  • Good application properties, resulting in a smooth surface
  • Easy to clean

Technical Info

Components: Two Part
Type: Amine Adduct Cured Phenolic Epoxy
Finish: Eggshell
Stock Colours: RAL 1004, RAL 1018, RAL 2004
Tintable: Yes, on request. Please note, bespoke tints are non refundable / exchangeable
VOC Content: 300.0g per Litre
Volume Solids: 66%
Suitable Substrates: For metal surfaces below sea
Application Method: Air Atomised Spray or Airless Spray
Theoretical Coverage: 6.6 m2 per litre at 100 microns
Wet Film Thickness (WFT):  
Dry Film Thickness (DFT): 100 - 175 microns
Induction Time: 15 minutes at 20°C
Pot Life: 4 hours at 20°C
Touch Dry: 2 hours at 20°C
Overcoatable: Between 3 hours and 21 days at 20°C
Fully Cured: 3 days at 20°C
Cleaner / Thinner: PPG Thinner 91-92. Clean up with PPG Thinner 90-53
Shelf Life: 24 months when stored in cool, dry conditions
Packaging: Available in 4 Litres

Related Products