£7.75 delivery on orders excluding certain products & postcodes *
Sherwin Williams Magnalux 41V2
SKU
ID21890
Part A: UN1263 (Class: 3, Pk Grp: III), Part B: UN1993 (Class: 3, Pk Grp: II), Catalyst: UN3105 (Class: 5.2)
A glass flake vinyl ester acrylic co-polymer that is approved to NORSOK Rev 6 System 7A and 7B.
Available in 20 Litres
From
£723.26
£602.72
In stock
Only %1 left
Product Description
Please note, this product has a 20 day lead time on delivery.
Sherwin Williams Magnalux 41V2 is a glass flake vinyl ester acrylic co-polymer that is approved to NORSOK Rev 6 System 7A and 7B.
Best Uses
Sherwin Williams Magnalux 41V2 is formulated for immersion environments where superior resistance to chemical attack is required. This product is suitable for many chemical environments within the full pH range. Sherwin Williams Magnalux 41V2 has excellent resistance to de-mineralised water and good resistance to many solvents. It is also used in aggressive atmospheric or spillage conditions (bund areas).
Primer: For temperatures up to 85°C use Magnalux 42PP, for temperatures above 85°C use Magnalux 41VP. Sherwin Williams Magnalux 41V2 is overcoatable with itself or Magnalux 43VC.
Application
Blast clean to Sa2½ ISO 8501-1:2007. Surface profile in the range 75-125 microns. Ensure surfaces to be coated are clean, dry and free from all surface contamination.
Apply using airless spray. Use a brush for small areas or touch ups only.
Technical Details
Approvals
- Norsok M-501 System 7A (Pre Qualified)
Technical Info
| Components: | Three Pack |
| Type: | Glass Flake Vinyl Ester Acrylic Co-Polymer |
| Finish: | Semi Gloss |
| Stock Colours: | Off White, Light Grey |
| Tintable: | No |
| VOC Content: | <50 g/L |
| Volume Solids: | 41% |
| Suitable Substrates: | For steel |
| Application Method: | Airless Spray |
| Theoretical Coverage: | 1.8 m2 per litre at 500 microns |
| Wet Film Thickness (WFT): | 555 microns |
| Dry Film Thickness (DFT): | 500 microns |
| Induction Time: | - |
| Pot Life: | 50 minutes at 20°C |
| Touch Dry: | 6 hours at 20°C |
| Overcoatable: | |
| Fully Cured: | 3 - 4 days at 20°C |
| Cleaner / Thinner: | Clean up with Sherwin Williams No.13. Do not thin |
| Shelf Life: | Base and catalyst (Hardener) 6 months, stored at temperatures below 20°C, away from heat sources and out of direct sunlight. Frequent temperature cycling will shorten storage life. |
| Packaging: | Available in 20 Litres |
Related Products
RODO ProDec Wet Paint Tape WPT200, 60mm x 200m
Wet Paint Warning Tape is a high visibility tape for marking out freshly painted areas.
£13.39
£11.16
Sherwin Williams Cleanser Thinner C13
A solvent based, specially formulated product to use alongside compatible Sherwin Williams products.
From
£61.06
£50.88
Sherwin Williams Degreaser W500 - Formerly Leighs Envirogard
A water based degreasing agent based on a blend of plant derived surfactants free from caustic alkalis, silicates, harmful solvents, phosphates or agg...
£73.67
£61.39
RODO Paddle Mixer
Ideal for use as an attachment to a drill to enable the thorough mixing of paints and coatings.
From
£9.24
£7.70
RODO All Purpose Paint and Varnish Paint Brush
A general contractor all purpose paint brush in various sizes.
From
£2.69
£2.24
Centrecoat WFT Wet Film Thickness Comb Gauge
An important tool to measure the depth of paint and coatings applied to substrates to ensure the correct thicknesses are applied.
£2.34
£1.95
RODO Blackrock Lightweight PU Gripper Gloves
Extremely lightweight gloves with PU coated palms and fingers for exceptional dexterity and grip in wet and dry conditions.
From
£0.77
£0.64
RODO Paint Scuttle BPSL - 25 Litre
A 20 inch plastic paint scuttle with metal handle which holds 25 litres of paint.
From
£14.58
£12.15