£7.75 delivery on orders excluding certain products & postcodes *
Owatrol Deks Olje D2 High Gloss Wood Finish Varnish is designed for use externally and internally on old and new wood. Owatrol Deks Olje D2 High Gloss Wood Finish is manufactured especially for use on woods already treated with Deks Olje D1. Owatrol Deks Olje D2 High Gloss Wood Finish is used to provide wooden substrates with a high glossy surface that gets better with every coat applied, at least 3 coats should be applied for the best performance.
Owatrol Deks Olje D2 High Gloss Wood Finish Varnish is a proven marine product suitable for use on boats, above the waterline, garden furniture, doors and windows, to name a few and can be used internally on a range of different surfaces too. Owatrol Deks Olje D2 High Gloss Wood Finish provides surfaces with a tough, durable and flexible finish that is easy to maintain. Unlike traditional varnishes D2 will not craze or blister and because of D1s penetrating qualities will not peel or flake as water is unable to get into the wood where it can also cause unsightly stains.
Owatrol Deks Olje D2 High Gloss Wood Finish Varnish can be applied using brush or roller and has a theoretical coverage rate of 15m2 per litre, per coat. Owatrol Deks Olje D2 High Gloss Wood Finish is a high quality varnish brought to you by Owatrol, and has a drying time of 12 hours before the second coat can be applied. Please allow 3-4 days after the product has been applied before using the surface in question.
Owatrol Deks Olje D2 High Gloss Wood Finish Varnish can be used on all marine applications above the water line and offers a high gloss finish that can be used on a selection of different surfaces, including, teak, ipe, bovinga, bolondo, iroco and timber. Owatrol Deks Olje D2 High Gloss Wood Finish has a light and resistant films that will not crack, peel or blister when exposed to UV light. Owatrol Deks Olje D2 High Gloss Wood Finish can be used on things like garden furniture, fences and stairs as well as boats, which is the recommended use.
Components: | Single Pack |
Type: | Solvent Based |
Finish: | Gloss |
Stock Colours: | Amber |
Tintable: | No |
VOC Content: | This product contains max. 399 g/L |
Volume Solids: | 56% ± 5 |
Suitable Substrates: | Hardwoods, softwoods, new or weathered wood, marine - all applications above the waterline |
Application Method: | Brush, Roller, Airless Spray or Air-Atomised Spray |
Theoretical Coverage: | 15 m2 per litre |
Wet Film Thickness (WFT): | - |
Dry Film Thickness (DFT): | - |
Induction Time: | - |
Pot Life: | - |
Touch Dry: | 12-24 hours per coat, depending on temperature and humidity |
Overcoatable: | Apply 6 coats of DEKS OLJE® D.2 allowing a minimum of 12 hours between coats. |
Fully Cured: | Allow 3 days for DEKS OLJE® D.2 to set-up and dry, before putting the boat in service. |
Cleaner / Thinner: | Do not thin. Clean all tools and equipment with white spirits while still wet |
Shelf Life: | 2 years from date of production unopened |
Packaging: | Available in 1, 2.5, 10 and 20 Litres |