£7.50 delivery on orders excluding certain products & postcodes *
Flag Thinners are best used with other FLAG products such as their anti-fouling and primers but as well as being used to thin FLAG paints they are also a really effective way of cleaning brushes and equipment as well.
Handle thinners with care and make sure that you observe all safety labels. Simply add the required amount of thinner to your FLAG anti fouling paint or FLAG primers.
When applying anti fouling or primer that contains FLAG thinner make sure that the surface is stable, firm, dry and free of dust, sand, loose old paint, dirt, grease, oil and salt.
Components: | Single Pack |
Type: | Thinner for all FLAG Antifoulings. Use for cleaning brushes and equipment |
Area of Use: | Interior and exterior |
Stock Colours: | Clear |
Tintable: | No |
VOC Content: | N/A |
Volume Solids: | N/A |
Suitable Substrates: | N/A |
Flash Point: | 42ºC |
Specific Gravity: | 0.87 |
Packaging: | Available in 1 Litre |
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.