Jotun No.10 Thinner has been specially blended to improve the flow of a range of Jotun polyurethane products. Can also be used as cleaner for pumps and tools before and after painting.
Specially suitable as thinner for polyurethane and similar products. Recommended usage as per the specific data sheet or application guide for that product. It is always recommended that you only use Jotun thinners with Jotun paints.
Thinners No.10 is also suitable for cleaning spray equipment such as airless spray pumps, hoses and spay guns after use. Jotun No.10 is also suitable for thinning a specific range of Jotun paints in order that the paint is thinner and easier to apply when using an airless spray.
Specially suitable as thinner for polyurethane and similar products. Recommended usage as per the specific data sheet or application guide of the product one wish to apply. The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away from sources of heat and ignition. Containers must be kept tightly closed. Handle with care.
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.