PPG SigmaFast 210 HS

SKU
ID14893
Part A and B: UN1263 (Class: 3, Pk Grp: III)
A fast curing, two component, high solids, high build zinc phosphate polyurethane primer / finish for in shop application to steel.
Available in 4 and 20 Litres. Tintable to RAL and BS colours.
From £109.02 £90.85
In stock
Only %1 left
Product Description

PPG SigmaFast 210 HS is a fast curing, two component, high solids, high build zinc phosphate polyurethane primer / finish for in shop application to steel.

Best Uses

PPG SigmaFast 210 HS is best used upon galvanised or mild steel for protection against atmospheric exposure. Formulated to be fast curing and specially designed for in shop application this product can be easily applied by airless spray. Non chalking and non yellowing with good colour retention. SigmaFast 210 HS offers fast application, fast curing and excellent durability as well as good gloss and colour retention. 

Tintable to a wide range of RAL and BS colours with a semi gloss finish.

Application

Applicable directly to blasted steel in single or multiple coat systems to simplify full system application. SigmaFast 210 HS also has option of additional catalyst to further accelerate curing speed.

Prepare steel by blast cleaning to ISO SA2 1/2 with a blasting profile of 40 - 70 microns. For galvanised steel, surface must be dry and free from any contaminants such as oil and grease. Surface should be sufficiently roughened by either sandpapering or sweep blasting. Substrate temperature during application and curing should be at least 3°C above dew point. Relative humidity should during application and cure should not exceed 85%. Substrate temperature during curing and application can go down to -5°C but the surface must be free from ice and be dry.

Recommended thinner PPG Thinner 21-06. Apply using airless sprayer.

Technical Details

Features

  • SigmaFast 210 HS offers fast application
  • Fast curing and excellent durability
  • Good gloss and colour retention
  • Applicable directly to blasted steel in single or multiple coat systems to simplify full system application
  • SigmaFast 210 HS also has option of additional catalyst to further accelerate curing speed

Technical Info

Components: Two Part
Type: Zinc Phosphate Polyurethane
Finish: Semi Gloss
Stock Colours: Just tints
Tintable: A wide range of colours available through the Colornet tinting system. Please note, bespoke tints are non refundable / exchangeable
VOC Content: 349.0g per Litre
Volume Solids: 67%
Suitable Substrates: For in shop application to steel and galvanized steel
Application Method: Air Atomised Spray or Airless Spray
Theoretical Coverage: 8.9m2 per litre at 75 microns
Wet Film Thickness (WFT):
Dry Film Thickness (DFT): 75 - 150 microns
Induction Time: -
Pot Life: 3 hours at 20°C
Touch Dry: 1.5 hours at 20°C
Overcoatable: After 6 hours at 20°C
Fully Cured: 4 days at 20°C
Cleaner / Thinner: PPG Thinner 21-06
Shelf Life: At least 24 months when stored cool and dry
Packaging: Available in 4 and 20 Litres

Related Products