Rustoleum 9100 High Solids Epoxy

SKU id9868 Part A: UN1263 (Class: 3, Pk Grp: III), Part B: UN2735 (Class: 8, Pk Grp: II)
A high performance epoxy system for application at temperatures down to 0°C.
Available in 5 Litres
£114.00 (£136.80 Inc VAT)
*These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.
£114.00 (£136.80 Inc VAT)

Product Description

Rust-Oleum 9100 High Solids Epoxy is a two component, high performance, solvent-based, epoxy system, containing rust-inhibitive pigments and designed for application at temperatures down to 0°C.

Best Uses

Rust-Oleum 9100 High Solids Epoxy is an industrial floor paint that offers outstanding resistance to chemicals, abrasion, impact, moisture and UV damage when used with an appropriate topcoat. Essentially you can use this product as a primer and topcoat depending on what functionalities you require.

  • Offers excellent protection against strong chemicals, acids, alkalis and solvents
  • Frequent product spillage and chemical cleaning
  • High humidity and moisture conditions
  • If good U.V. resistance is required, Rust-Oleum Polyurethane Topcoats 9200, 9600 or 9900 should be applied
  • Rust-Oleum 9100 High Solids Epoxy can be applied on cleaned, sound mineral substrates, well prepared previous coatings
  • Easy mixing 1:1 ratio
  • Low VOC
  • Available in almost any colour
  • A high build primer and finish in one
  • Use on concrete and metal
  • Very resistant to abrasion
  • Suitable for frequent cleaning with chemicals


Rust-Oleum 9100 High Solids Epoxy is designed especially for application using brush and airless spray and can also be applied using roller if you feel this is necessary. Depending on the activator you choose depends on the drying time and coverage rates which are usually between 4-8 hours touch dry time with a theoretical coverage rate of 6-8m2 per litre.

This product is also available as Standard, High Solids and Winter Grade variants. Click below for links:

Surface and Environment

Rust-Oleum 9100 High Solids Epoxy has been specially developed for application to manually rusted steel surfaces and can also be used on clean, blasted steel, primed steel, concrete and previously coated surfaces. This product can be applied in conditions where this a high level of humidity and moisture present in the air.

Recommended Products To Use

Rustoleum-Mathys 9170 / 9180 High Performance Metal Primer

Rustoleum-Mathys 9170 / 9180 High Performance Metal Primer

A fast drying product, based on solvent-based epoxy resins that contains rust inhibitive pigments to protect all metal sur...

£112.75 (£135.30 Inc VAT)
Rustoleum 3333 Super Adhesive Primer

Rustoleum 3333 Super Adhesive Primer

A super adhesive, two pack, water based epoxy primer. For very smooth, hard to adhere substrates such as tiles.

£110.66 (£132.79 Inc VAT)
Rustoleum 5401 Impregnation Primer

Rustoleum 5401 Impregnation Primer

Rustoleum-Mathys Impregnation Primer 5401 is a solvent free, two component epoxy primer for concrete floors.

£25.06 (£30.07 Inc VAT)
Rustoleum Pre-Paint Cleaner 2904

Rustoleum Pre-Paint Cleaner 2904

An effective, concentrated cleaner to clean all types of surfaces prior to painting.

£7.17 (£8.60 Inc VAT)