Selemix Aqua 8-110 2K Single Stage Gloss Topcoat

SKU
ID110554
Non Hazardous
A water based polyurethane coating which can be applied direct to suitably prepared steel.
Available in a huge range of colours
From £50.62 £42.18
In stock
Only %1 left
Product Description

Selemix Aqua 2k Single Stage Topcoat is a water based polyurethane coating which can be applied direct to suitably prepared steel - ideal for application on agricultural and plant equipment. London Underground Approved Item No.5075.

Please note, the Hardener is not included with this product. Compatible Hardener is Selemix 9-110.

Selemix 2k Single Stage Topcoat is a water-based paint formulated with polyurethane which will provide a high quality finish with excellent colour retention and durability, the paint is also highly resistant to weathering, mechanical and chemical stress. It is available in high gloss finish and can be tinted to most RAL, BS & NCS colour codes.

Please note, different gloss levels can be achieved through blending Selemix Aqua 8-110 with Selemix 2k 8-111 Single Stage Matt Topcoat. Please see the Matting Chart for further information.

Best Uses

Selemix 8-110 is best applied either directly to suitably prepared steel or on top of an applicable Selemix primer, using as part of the aforementioned system the product is perfect for application on to mild steel, bare steel, aluminium, stainless steel, phosphate steel, galvanised steel, previously coated steel, light alloys, machine tools, lathes, surface grinders, milling machines, pull saws, table saws, welding machines, break presses, guillotines, fly presses, drill presses, agricultural equipment, trailers, combine harvesters, muck spreaders, bailers, tractors, trailers, tillers, ploughs, cars, trucks motorcycles, bicycle frames, control panels, welfare cabins, shipping containers, plant equipment, diggers, dumpers, excavators, power barrows, screed pumps, cranes, crawler cranes, lifting gear, chain slings, gennie lifts, goods hoists, railings, garden furniture, steel doors, roller shutters doors, window frames, airport ground support equipment plus many more.

  • Corrosion resistant
  • High UV resistant
  • Environmentally friendly
  • High quality finish

Application

All substrates will need to be suitable abraded and degreased before application of 8-110, for optimum results and performance it is recommended 2 coats are applied.

Selemix 8-110 can be applied by both conventional and air assisted / airless spray equipment, when applied at a 70 micron dry film thickness has theoretical coverage of 5.2-6.4m2 per litre.

As Selemix 8-110 is a 2 pack paint it will need to be combined with Selemix Hardener 9-110 at a general ratio of 2.5 to 1, it will then need to thinned with clean water at general ratio of between 5-20% volume. Always consult the technical datasheet prior to use for the applicable ratio.

Technical Details

Certificates and Approvals

  • London Underground Approved Item No.5075 - The paint system meets the LU Standard S1085 for applications over small panels, and can be used in sub-surface stations.

Features and Benefits

  • Formulated with polyurethane
  • For test results, please refer to downloadable sheet found under the above Data Sheet tab
  • High quality finish
  • Highly durable
  • Weather, mechanical & chemical stress resistant
  • Can be applied direct to suitably prepared steel

Technical Info

  • Always consult manufacturers technical datasheet prior to application
Components: Single Pack
Type: Water Based
Finish: High Gloss
Stock Colours: Available in a wide range of colours
Tintable: Yes. Please note, bespoke tints are non refundable / exchangeable
VOC Content: 140-198 g/L
Volume Solids: 36-50 %
Suitable Substrates: Steel, galvanized steel, phosphate steel, or aluminium surfaces
Application Method: Airmix Spray, Conventional Spray, Electrostatic Spray
Theoretical Coverage: 5 - 7 m² per litre at 70µm DFT
Wet Film Thickness (WFT): 125-150µm
Dry Film Thickness (DFT): 60-80µm
Induction Time: -
Pot Life: 2 hours at 20°C
Dust Free: 20-25 minutes at 20°C (standard mode)
Touch Dry: 5-6 hours at 20°C (standard mode)
Dry to Handle: 8-9 hours at 20°C (standard mode)
Overcoatable: Min 8 hours to max 24 hours at 20°C
Hard Dry: 24-36 hours at 20°C (standard mode)
Compatible Hardener: Selemix 9-110
Cleaner / Thinner: Thin with Tap Water
Shelf Life: Store above 5°C in frost free environment
Packaging: Available in 1, 2.5, 5 and 20 Litres

Matting Chart (All Colours)

Gloss Level Tinting Ratio (by weight)  
     
High Gloss Binder 8-110:    60
  WB Tinters:       40
     
Semi Gloss (~70%) Binder 8-111:    36
  Binder 8-110:    24
  WB Tinters:       40
     
Semi-Matt (~30%) Binder 8-111: 48
  Binder 8-110: 12
  WB Tinters: 40
     
Matt (15-20%) Binder 8-111: 60
  WB Tinters: 40

Related Products