Centrecoat WB Cladding Paint is a high quality, anti-corrosive water based cladding paint, fast drying and holds a good wet edge. Ideally suited for Plastisol Industrial units, wooden cladding, carbon steel, modular building and containers.
Centrecoat WB Cladding Paint is a high quality anti corrosive water based sheen finish that has shown proven adhesion to a wide variety of difficult to paint substrates. This water based external cladding paint is ideal for use on Plastisol, modular buildings with cladding that requires coloured protection against the elements.
- Tintable to most BS4800 and RAL Colours
- Waterborne coating with proven adhesion to a wide range of substrates
- Non-toxic environmentally friendly coating
- Fast drying
- Excellent coverage
Suitable substrates include carbon steel, galvanised steel (new and weathered), aluminium (including untreated), Plastisol sheeting, pre-painted surfaces, glass, ceramic tiles, wood, GRP and certain rigid plastics.
Can be applied by a variety of application methods including airless spray or air assisted airless spray (13-15 thou tip). Dry to handle after 30 minutes at 20°C. Full cured after 7 days at 20°C.
|Stock Colours:||08-E-51, RAL 1014, RAL 9010, RAL 7043|
|Tintable:||Yes, to most RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable|
|Volume Solids:||42% Depending on Colour|
|Suitable Substrates:||Carbon steel, galvanised steel (new and weathered), aluminium (including untreated), plastisol sheeting, pre-painted surfaces, glass, ceramic tiles, wood, GRP and certain rigid plastics.|
|Application Method:||Brush, Roller, Air or Airless Spray|
|Theoretical Coverage:||6 - 12 m2 per litre. Depending on application - contact technical support for details|
|Wet Film Thickness (WFT):||83 microns/coat|
|Dry Film Thickness (DFT):||35 microns per/coat|
|Touch Dry:||15 - 30 minutes at 20°C|
|Dry to Handle:||30 minutes at 20°C|
|Fully Cured:||7 days at 20°C|
|Cleaner / Thinner:|
|Shelf Life:||See container|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.