Pronto 203:052 Skip and Container Paint is formulated as a quick drying, anti corrosive primer / finish for steel. A economical paint solution for the refurbishment of skips and containers.
Pronto 203:052 Quick Drying Anti Corrosive High Build Primer / Finish is a high quality, high sheen finish formulated to be resistant to mild chemicals, rust, salt spray and other forms of corrosion. This Container Paint has good recoating properties with good exterior durability.
Pronto 203:052 Quick Drying Anti Corrosive High Build Primer / Finish is ideal for the restoration of metal skips, container shells, agricultural bins, industrial waste bins, food waste containers, scaffold beds, plant bodies, HL5 bodies, FELs (Front End Loading) chain skips, RELs (Rear End Loading), stillages, recycling containers and more.
- Fast drying
- Ideal for pre-painted refurbishment
- Excellent recoating properties
- Quick Drying, enables the container to be on a lorry for transport before the day is out.
- Available in a huge range of RAL, BS and Custom colours
203:052 is best applied by airless or air assisted spray onto clean, dry steel that is free from contamination. Theoretical coverage for this product is 5m2 per litre at 85 microns, depending on the substrate quality.
|Stock Colours:||Just tints|
|Tintable:||Yes, tintable to RAL, BS and custom shades. Please note, bespoke tints are non refundable / exchangeable|
|Suitable Substrates:||For steel substrates|
|Application Method:||Air Atomised Spray or Airless Spray|
|Theoretical Coverage:||5m2 per litre at 85 microns|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):||85 microns|
|Touch Dry:||15 minutes at 20°C|
|Handle Dry:||2 - 4 hours at 20°C|
|Fully Cured:||7 days at 20°C|
|Cleaner / Thinner:|
|Packaging:||Available in 5 and 20 Litres (4 x 5 Litres)|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.