£7.75 delivery on orders excluding certain products & postcodes *
PPG SigmaTherm 175 Heat Resistant Aluminium Finish
SKU
ID3956
UN1263 (Class: 3, Pk Grp: III)
A heat resistant modified alkyd product that produces an aluminium finish, ideal for use on a variety of metal substrates exposed to a high level of heat.
Available in 5 Litres
From
£72.82
£60.68
In stock
Only %1 left
Product Description
PPG SigmaTherm 175 is a heat resistant modified alkyd product that produces an aluminium finish, ideal for use on a variety of metal substrates exposed to a high level of heat.
Best Uses
PPG SigmaTherm 175 is named 175 because it resists heat of up to and including 175°C and offers high brilliancy in interior and sheltered exterior applications. SigmaTherm 175 is ideally suited for application to pipes, radiators and low heat engines to aid the protection of the surface and surrounding area.
Application
SigmaTherm 175 should be applied using a spray gun to improve the appearance of the surface but can be applied using brush or roller for touch ups too. SigmaTherm 175 is dry to touch after just 3 hours at low temperatures and can be overcoated in 16-36 hours. Make sure you leave 3 full days for the product to cure at 20°C before you expose the surface to heat, this is vital in ensuring the product has adhered to the surface properly and will perform properly.
Surface and Environment
SigmaTherm 175 is a high performance product that provides surfaces with a high glossy finish to aid protection and offer a level of decoration with an aluminium effect. SigmaTherm 175 should ideally be used internally to offer heat resistance to appliances of up to 175°C.
Technical Details
Approvals
- Approved for MoD use
Notes
- Heat resistant up to 175°C
- High brilliancy
- Spray application improves the appearance
- A minimum drying time of 3 days at 20°C should be allowed before exposure to heat
Technical Info
| Components: | Two Components |
| Type: | Heat Resistant |
| Finish: | Gloss |
| Stock Colours: | Aluminium RAL9006 |
| Tintable: | No |
| VOC Content: | 417.0 g/l |
| Volume Solids: | 47 +/- 2% |
| Suitable Substrates: | Ideal for use on a variety of metal substrates |
| Application Method: | Brush, Roller, Airless Spray or Air Spray |
| Theoretical Coverage: | 18.8 sq m/l for 25 microns |
| Wet Film Thickness (WFT): | - |
| Dry Film Thickness (DFT): | 25 microns (1.0 mils) per coat |
| Induction Time: | - |
| Pot Life: | - |
| Touch Dry: | 1 hour at 20°C |
| Overcoatable: | After 16 hours at 20°C |
| Fully Cured: | - |
| Cleaner / Thinner: | If using an air spray: Thinner 20-05. For application by airless spray, brush or roller, no thinner should be added. To clean: Thinner 20-05 |
| Shelf Life: | At least 24 months when stored cool and dry |
| Packaging: | Available in 5 Litres |
