£7.75 delivery on orders excluding certain products & postcodes *
SigmaCover 690 LT Aluprimer is a self priming product that can be used with most aged coatings with good adhesion properties, even at low temperatures and can be recoated with any epoxy and polyurethane coatings if you require a more decorative finish. SigmaCover 690 Aluprimer is available in dark and light aluminium semi-gloss that can be used to create an aesthetically pleasing finish on steel substrates.
SigmaCover 690 LT Aluprimer can be applied using brush, roller or spray once the two components have been mixed together and offers users a theoretical coverage rate of 7-12m2. After 5 hours the surface will be touch dry and ready for a recoat after a minimum of 24 hours.
SigmaCover 690 LT Aluprimer SigmaCover 690 Aluprimer can be used in a wide range of different environments to offer excellent impact and abrasion resistance, making it highly suitable in industrial and construction environments. SigmaCover 690 Aluprimer can be used in environments with low temperatures, on most metal substrates.
Sigmacover 690 LT Aluprimer is part of the PPG Sigmacover range of products available from Promain.
Notes
Components: | Two Component |
Type: | Epoxy Primer |
Finish: | Semi Gloss |
Stock Colours: | Aluminium |
Tintable: | No |
VOC Content: | 222.0 g/l |
Volume Solids: | 88 +/- 2% |
Suitable Substrates: | Metal |
Application Method: | Brush, Roller, Airless Spray or Air Spray |
Theoretical Coverage: | 11.7 m2/l for 75 microns |
Wet Film Thickness (WFT): | - |
Dry Film Thickness (DFT): | 11.7 m2/l for 75 microns, 7.0 m2/l for 125 microns |
Induction Time: | - |
Pot Life: | 3 hours at 10°C |
Touch Dry: | 5 hours |
Overcoatable: | Minimum: 24 hours to Maximum: 4 months |
Fully Cured: | 5 days at 20°C |
Cleaner / Thinner: | PPG Thinner 91-92, clean with PPG Thinner 90-53 |
Shelf Life: | At least 12 months when stored cool and dry |
Packaging: | Available in 4 and 20 Litres |