£7.75 delivery on orders excluding certain products & postcodes *
Rustoleum PVDF Primer has been specially developed as an adhesion primer for use on PVDF and PDVF2 metal profile cladding. PVDF Primer is also ideal for application to new un-weathered galvanised steel, zinc or aluminium sheeting. As part of the Rustoleum 10 year warranty system it is recommended that the PDVF primer is applied before the first coat of Noxyde.
This single pack solvent based super adhesion primer has been formulated from modified vinyl resins that offer exceptional hydrophobic qualities (Cori test report ref. N/8384) as well as offering outstanding performance as an adhesion promoting primer to smooth and difficult to coat metal substrates.
After removing any grease, oil or other contaminates from the surface with Rustoleum ND14 and either a pressure washer or steam cleaner. PVDF primer can be applied by air-atomised spray, brush or roller. When painting either zinc or corroded aluminium it will need to be treated with Rustoleum Surfa-Etch 108. When applying PVDF primer to smooth surfaces the theoretical coverage rate is 10m2 per litre. The coverage rate will very depending upon the porosity and texture of the surface. Touch dry after 30 minutes at 20°C.
Components: | One Part |
Type: | Solvent Based |
Finish: | Satin |
Stock Colours: | Grey |
Tintable: | No |
VOC Content: | 570.0g per Litre |
Volume Solids: | 30% |
Suitable Substrates: | For PVDF or PVF2, galvanised steel, zinc and aluminum |
Application Method: | Brush, Roller, Air Atomised Spray or Airless Spray |
Theoretical Coverage: | 10 m2 per litre |
Wet Film Thickness (WFT): | 100 microns |
Dry Film Thickness (DFT): | 30 microns |
Induction Time: | - |
Pot Life: | - |
Touch Dry: | 30 mins at 20°C |
Overcoatable: | After 24 hours at 20°C |
Fully Cured: | 7 days at 20°C |
Cleaner / Thinner: | Rustoleum Thinner 22 |
Shelf Life: | 5 years unopened |
Packaging: | Available in 5 Litres |