Anti Corrosive Primers - Two Pack

A self-priming pure epoxy paint which cures to a corrosion resistant coating.

A two pack epoxy primer/finish offering corrosion protection in one coat.

A solvent free, water based primer for correctly prepared steel.

A fast drying, rapid recoat, metallic zinc-rich epoxy primer. Replacement for Interzinc 52.

A two component primer which is ideal for speeding up production and throughput.

An epoxy primer which provides optimised control where thin film application is required.

A fast curing epoxy primer for use with International 3200 product series.

A pure epoxy primer with anti-corrosive properties and overcoating intervals of up to 6 months.

A two pack epoxy, mid-sheen primer/finish for blast cleaned steelwork. Low temperature curing and high build airless spray capability.

A two component surface tolerant, high solids, high build coating. NORSOK approved.

A self-priming, two-component, high build epoxy paint containing zinc phosphate.

A hard wearing, long lasting priming barrier for use in severe corrosive environment systems.

A direct to metal user friendly rapid curing epoxy.

A 2 pack epoxy zinc rich anti corrosive primer for the protection of blast cleaned steel.

A 2 pack high build anti-corrosive epoxy mastic which can be applied in high film thicknesses for smaller maintenance and repair jobs.

A two-component epoxy paint, that cures to a flexible, well adhering coating with good abrasion and impact resistance.

A two-component, activated zinc epoxy primer in compliance with the requirements for Level 3, type II in SSPC Paint 20, 2002.

A 2 pack epoxy vinyl primer that can be applied in a wet on wet paint system with a minimum of 2 hours between coats.

A 2K high build epoxy primer containing anticorrosive pigments.

Formulated for application to exposed metal substrates prior to the application of Sika Liquid Plastics Roofing and Balcony Waterproofing System.

A two-pack epoxy, high solids, surface tolerant aluminium primer.

A two component, polyamide cured, epoxy primer that can be used as a general purpose epoxy primer, ideal for use on steel and non ferrous metals.

A two component, quick drying, anti-corrosive zinc epoxy primer for use onto suitably prepared steel.

A two pack corrosion resistant metal primer formulated as a weldable pre-construction primer or field or shop applied primer.

A two component, anti-corrosive metallic zinc rich epoxy primer.

A low VOC, high solids, rapid cure primer/finish, offering excellent anti-corrosive protection and long term colour and gloss durability.

A two component, low VOC, high solids, fast drying polyaspartic gloss primer/finish coating.