£7.75 delivery on orders excluding certain products & postcodes *
SigmaCover 280 (Amercoat 185 HS) works excellently well at providing good adhesion to steel, galvanised steel and non ferrous metals ready to be overcoated with most alkyd, chlorinated rubber, vinyl, epoxy and two component polyurethane coatings. Because of its excellent adhesion 280 has fantastic recoating properties that provide surfaces with the perfect protection.
SigmaCover 280 can be applied using airless spray, long haired brush or roller with rounder edges and has an ultra fast drying time of just 1 hour. SigmaCover 280 is part of the ISO 12944-6 System For Steel C4 High system. Please refer to data sheets or systems for suitable coverage requirements, or contact our technical team on 01462 421333.
PPG SigmaCover 280 is used within the following PPG systems:
See Data Sheets tab for System sheet downloadable PDF.
Components: | One Part |
Type: | Solvent Based |
Finish: | Eggshell |
Stock Colours: | Yellow Green, Red Brown, Light Grey |
Tintable: | No |
VOC Content: | 432.0g per Litre |
Volume Solids: | 57% |
Suitable Substrates: | For ballast tanks, decks, topside, superstructure, hull and cargo oil tanks, concrete and masonry |
Application Method: | Brush, Roller, Air Atomised Spray or Airless Spray |
Theoretical Coverage: | 11.4m2 per litre at 50 microns |
Wet Film Thickness (WFT): | |
Dry Film Thickness (DFT): | 50 - 100 microns |
Induction Time: | - |
Pot Life: | - |
Touch Dry: | 8 hours at 20°C |
Overcoatable: | See datasheet for overcoating tables |
Fully Cured: | 7 days at 20°C |
Cleaner / Thinner: | PPG Thinner 91-92 |
Shelf Life: | At least 24 months when stored cool and dry |
Packaging: | Available in 4 and 20 Litres |