£7.75 delivery on orders excluding certain products & postcodes *
A one component physically drying, fast drying vinyl coating that can be used as primer or mid coat in atmospheric and immersed environments.
A two component, polyamide cured, high molecular weight epoxy coating designed as a primer for new construction.
A two component amine cured epoxy coating designed for new construction where short dry to handle and over coating times are required.
Formulated as a primer, finish coat or as single coat system in atmospheric environments or as a final coat in immersed environment.
A two-component epoxy primer coating especially for use on surfaces exposed to severe abrasion.
A two-component, activated zinc epoxy primer in compliance with the requirements for Level 3, type II in SSPC Paint 20, 2002.
A 2 part, moisture curing, waterborne, low zinc silicate, prefabrication primer suitable for immediate application on shot blasted steel plates.
A two component moisture curing, low zinc, silicate prefabrication primer, suitable for application on shot blasted steel plates.
A multi functional epoxy coating suitable for the protection of steelwork in a range of exposure environments from C1 to C5.
A hard wearing, long lasting priming barrier for use in severe corrosive environment systems.
A zinc phosphate 2 pack epoxy paint for use in corrosive environments within a Hempel coatings system.
A high solids, abrasion resistant, aluminium pure epoxy primer. Provides excellent long term anti-corrosive protection and low temperature capability....
This Primer has good resistance to water, solvents and abrasion and is ideal for protecting ferrous steel in aggressive environments.
A 2 pack high build anti-corrosive epoxy mastic which can be applied in high film thicknesses for smaller maintenance and repair jobs.
A two part polyamide cured, high molecular weight epoxy coating, designed as a high build, all purpose coating for new construction.
Provides protection for bare or blasted metal and has maximum durability under severely corrosive conditions.
A two component polyamide-cured epoxy tiecoat for a wide range of topcoats for immersion and non-immersion service.
A quick drying two component epoxy primer for immersed or exposed conditions within a system.
A fast drying product, based on solvent-based epoxy resins that contains rust inhibitive pigments to protect all metal surfaces.
A two component, metallic zinc primer for steel in aggressive environments.
A two component, fast drying modified epoxy phosphate prefabrication primer for manual or automatic spray application.
A fairly quick-drying alkyd paint for various substrates in mild to moderately corrosive environments.