Hempel Hempadur Avantguard 550 is a two-component, activated zinc epoxy primer in compliance with the requirements for Level 3, type II in SSPC Paint 20, 2002.
Hempadur Avantguard 550 functions as a zinc-rich epoxy featuring a higher mechanical strength. Can utilize ASTM D520, type II zinc dust. Hempel Hempadur Avantguard 550 is ideal as a versatile primer for long-term protection of steel in severely corrosive environments.
- Reduces the effect of corrosion and offers excellent protection
- Good mechanical strength, also in cyclic temperatures, with improved crack resistance through high flexibility and self-healing of micro cracks
- High tolerance to different climatic conditions (high temperature and humidity) during application, as well as, to high dry film thickness
Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Abrasive blasting to Sa 2½ (ISO 8501-1:2007), SSPC-SP 10/ NACE No. 2, with a sharp-edged surface profile corresponding to Rugotest No. 3, BN10a-b, Keane-Tator Comparator, 3.0 G/S, 2-3 S, or ISO Comparator, Medium (G). See application instructions data sheet.
Use only where application and curing can proceed at temperatures above: -10°C/14°F. Maximum application temperature is 40°C/105°F. Maximum relative humidity: 95%. Special attention should be made to the prevailing temperature and RH trend to ensure that conditions are within the acceptable range throughout the application and drying time. The temperature of paint itself should be 15°C/59°F or above. Apply only on a dry and clean surface with a temperature above the dew point to avoid condensation. In confined spaces provide adequate ventilation during application and drying.
Before mixing with the curing agent stir the base thoroughly in order to re-disperse any possible settling after storage. After mixing it is equally important to maintain stirring to keep the wet paint as a homogeneous mixture. This is specifically important in case of a high level of thinning and/or long break in application, where
the risk of settlement of zinc particles is the highest.
- Complies with European Fire Standard EN 13501-1; classification B-s1, d0
- Complies with EU Directive 2004/42/EC: subcategory j
|Stock Colours:||19840 Dark Grey|
|VOC Content:||325 g/L|
|Suitable Substrates:||For steel in corrosive environments|
|Application Method:||Airless spray / Air spray / Brush / Roller|
|Theoretical Coverage:||10.8 m2 per litre at 60 microns|
|Wet Film Thickness (WFT):||90 microns|
|Dry Film Thickness (DFT):||60 microns|
|Pot Life:||3 hours at 20°C|
|Surface Dry:||10 minutes at 20°C|
|Overcoatable:||See data sheet|
|Fully Cured:||7 days at 20°C|
|Cleaner / Thinner:||Clean tools with HEMPEL'S TOOL CLEANER 99610|
|Shelf Life:||1 year for BASE and 3 years (25°C/77°F) for CURING AGENT from time of production.|
|Packaging:||Available in 10 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.