Nullifire PM018 Primer or Top Seal Epoxy Coating

SKU id17656 Part A and Part B: UN1263 (Class: 3, Pk Grp: II)
A two component, heavy duty, high build modified epoxy coating for the protection of steel in corrosive environments.
Available in 20 Litres
£338.55 (£406.26 Inc VAT)

Product Description

Nullifire PM018 Primer or Top Seal Epoxy Coating is a two component, heavy duty, high build modified epoxy coating for the protection of steel in corrosive environments. Also formulated to protect base coats.

Best Uses

Nullifire PM018 Primer or Top Seal Epoxy Coating is suitable as either a high corrosion resistant primer or as a protective top seal in a Nullifire intumescent system. PM018 is easy to apply using airless spray equipment. This protects base coated steel in transit from factory to site. Suitable for areas C1, C2 and C3.

Application

Nullifire PM018 is recommended to be applied via airless spray equipment. Please contact our technical team for loadings information to ensure your project is sufficiently protected against fire for the times recommended by building control. Apply using either airless spray equipment, brush or roller following the data sheets found on the technical tab.

IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.

Recommended Products To Use


Nullifire FC002 Thinner

Nullifire FC002 Thinner

Formulated for use with specified Nullifire Base Coats and Top Coat systems.

£38.50 (£46.20 Inc VAT)