PPG Amercoat 71 TC

SKU
id12785
Part A and B: UN1263 (Class: 3, Pk Grp: III)
A two component polyamide-cured epoxy tiecoat for a wide range of topcoats for immersion and non-immersion service.
Available in 20 Litres
From £312.96 £260.80
In stock
Only %1 left
Product Description

PPG Amercoat 71 TC is a two component polyamide-cured epoxy tiecoat for a wide range of topcoats for immersion and non-immersion service.

Best Uses

PPG Amercoat 71 TC forms a durable coating system with a wide range of topcoats for immersion and non-immersion services. Provides excellent adhesion to steel, shop primer, galvanised steel and non ferrous metals. Suitable as a tiecoat over PPG Dimetcote.

Application

If applying onto steel, blast clean to ISO 2 1/2 or SSPC-SP-10, blasting profile 25 - 50 microns. Previous suitable coat must be dry and free from contamination. Apply primer as soon as possible after preparation. Galvanised steel must be free from grease, salts and any contamination. Recommended PPG Thinner 91-83.

Technical Details
Components: Two Component
Type: Polymide-cured epoxy tiecoat
Finish: Flat
Stock Colours: Off white & Red Oxide
Tintable: No
VOC Content: 435.0 g/l
Volume Solids: 51 +/- 2%
Suitable Substrates: Steel, Shop Primer, Galvanizrd Steel and non-ferrous metals
Application Method: Brush, Roller, Airless Spray or Air-Atomised Spray
Theoretical Coverage: 10.2 m2/l for 50 microns
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): 50 - 100 microns
Induction Time: None
Pot Life: 4 hours at 20°C
Touch Dry: 2 hours at 20°C
Overcoatable: Minimum 4 hours at 20°C
Fully Cured: -
Cleaner / Thinner: PPG Thinner 91-83. Clean with PPG Thinner 90-58
Shelf Life: At least 24 months when stored cool and dry
Packaging: Available in 20 Litres

Related Products