Rustoleum-Mathys 9180 High Performance Metal Primer

SKU
id3651
Part A and B: UN1263 (Class: 3, Pk Grp: III)
A fast drying product, based on solvent-based epoxy resins that contains rust inhibitive pigments to protect all metal surfaces.
Available in 5 Litres
From £174.01 £145.01
In stock
Only %1 left
Product Description

Rustoleum-Mathys 9180 High Performance Metal Primer is a fast drying product, based on solvent-based epoxy resins that contain rust inhibitive pigments to protect all metal surfaces.

Rustoleum-Mathys 9180 High Performance Metal Primer is available in grey or red and can be used on all sound substrates.

Best Uses

Rustoleum-Mathys 9170/9180 High Performance Metal Primer is best used for priming all sound substrates including bare, blasted and galvanised steel. Rustoleum-Mathys 9180 High Performance Metal Primer is ideally suited for all industrial exposures as well as construction sites and areas exposed to high humidity, such as coastal and marine enclosures.

Application

Rustoleum-Mathys 9180 High Performance Metal Primer has been designed to be applied by spray gun but can be applied using brush and roller too for touch ups and small jobs only. Rustoleum-Mathys 9180 High Performance Metal Primer has a theoretical coverage rate of 7m2 per litre and offers a touch dry time of just 1 hour.

Surface and Environment

Rustoleum-Mathys 9180 High Performance Metal Primer can be used on a variety of metal surfaces in all kinds of conditions. You can literally prime any properly prepared metal substrate using this high quality metal primer due to the properties it possesses. Rustoleum-Mathys 9180 High Performance Metal Primer can withstand strong weathering and has excellent resistance to corrosion, chemical spillages, moisture, acids, alkalis and frequent cleaning.

Technical Details
Components: Two Part
Type: Solvent Based
Finish: Matt
Stock Colours: 9180 - Grey
Tintable: No
VOC Content: 421.0g per Litre
Volume Solids: 52%
Suitable Substrates: For bare steel, on blasted steel and properly prepared galvanized substrates or as an intermediate coat
Application Method: Brush, Roller, Air Atomised Spray or Airless Spray
Theoretical Coverage: 7 m2 per litre
Wet Film Thickness (WFT): 150 microns
Dry Film Thickness (DFT): 75 microns
Induction Time: -
Pot Life: -
Touch Dry: 1 hour at 20°C
Overcoatable: After 16 hours at 20°C
Fully Cured: 8 days at 20°C
Cleaner / Thinner: Rustoleum Thinner 160
Shelf Life: 5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C
Packaging: Available in 5 Litres

Related Products