Centrecoat Zinc Phosphate Primer 580

SKU
ID12497
UN1263 (Class: 3, Pk Grp: III)
A white spirit based, single pack quick drying primer for the protection of metal against corrosion.
Available in 5 Litres in Grey
From £119.09 £99.24
In stock
Only %1 left
Product Description

Centrecoat Zinc Phosphate Primer 580 is a white spirit based, single pack, quick drying primer for the protection of structural steel against corrosion.

Best Uses

Centrecoat Zinc Phosphate Primer 580 is suitable for interior or exterior use on structural steel and iron. Ideal as a tough and durable primer suitable for recoating with standard white spirit based alkyd top coats such as Centrecoat Fast Dry Gloss. Centrecoat Zinc Phosphate Primer 580 provides an anti corrosion system in just one day with excellent flow.

Application

Centrecoat Zinc Phosphate Primer 580 can be applied by brush or roller. It can also be applied by air or airless sprayer for large areas. Substrate must be dry and clean, free from contaminants. Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning in combination with appropriate detergents. For optimum results remove rust, rust scale, mill scale and deteriorated coatings by abrasive blasting to Sa 2½ (ISO 8501-1 : 1988), blast profile max. 50 μm. If blasting is not possible, remove loose rust and loose coatings by scraping and/or wire brushing to St 3 (ISO 8501-1 : 1988). Sand previous coatings which are in good condition to remove gloss and to roughen the surface slightly. The surface must be clean and dry during application.

To ensure homogeneity, coating materials should be thoroughly stirred prior to use.

Technical Details

Features

  • White spirit based
  • Recoatable with standard white spirit based alkyd top coats
  • Lead and chromate free

Technical Info

Components: One Part
Type: Solvent Based
Finish: Matt
Stock Colours: Grey (RAL 7035)
Tintable: Yes, to many RAL and BS colours. Please note, bespoke tints are non refundable / exchangable.
VOC Content: 424.0g per Litre
Volume Solids: 44.8%
Suitable Substrates: For new, blasted or slightly rusted steel surfaces
Application Method: Brush, Roller, Air Atomised Spray or Airless Spray
Theoretical Coverage: 12.8 m2 per litre
Wet Film Thickness (WFT): 80 microns
Dry Film Thickness (DFT): 35 microns
Induction Time: -
Pot Life: -
Touch Dry: 1 hour at 20°C
Overcoatable: After 2 hours at 20°C
Fully Cured: 8 days at 20°C
Cleaner / Thinner: Rustoleum Thinner 633
Shelf Life: 5 years
Packaging: Available in 1 and 5 Litres

Related Products